I'm putting a chassis works 4 link setup in my car. It says to set the front 4 link braket 5.5" off the ground. Will it screw up any thing if I have it higher and do the 4 link bars have to be the same length. It doesn't look like it should be by the blue print. But a friend of my says they should be.

he's probably talking about the IC being 5.5" above the ground not the bracket. and yes the bars have to be the same length.

No it's the bracket, they have a 3.5" and a 5.5" ground clearance on thier kit.

You can fudge the four link bracket per the ride height of your car. It won't matter if the four link bars are equal length, and they won't be on your alston kit. Mike

thks

How much higher ??

I would determine the height of the lowest hole on the axle bracket and make sure I didn't put the lowest hole on the frame bracket any higher with the car in its static height.

probaby around 7.5" to the bottom hole of the front bracket.