Re: Offset shackles with production springs?
[Re: davenc]
#827625
10/12/10 12:05 PM
10/12/10 12:05 PM
|
Joined: Jan 2003
Posts: 21,080 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,080
Niles , Ohio
|
Stock springs will work.My kids 62 300 has a set on the rear and they have been on at least 10 years.Rocky
Chrysler Firepower
|
|
|
Re: Offset shackles with production springs?
[Re: BDW]
#827629
10/12/10 09:05 PM
10/12/10 09:05 PM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
Correct me if I'm wrong, but the MP hangers are designed for the SS springs, which are 2" shorter than the stock springs. So the hanger is actually longer than the stock hanger. If you were to use the MP hanger with stock springs the car would be jacked up pretty high?
Here's a pic of a set I sold before getting a Dr Diff set that works with stock springs.
Oh I forgot, you have to use A body offset front hangers on a E body with reg springs. Good catch.
|
|
|
Re: Offset shackles with production springs?
[Re: davenc]
#827632
10/14/10 11:56 AM
10/14/10 11:56 AM
|
Joined: Feb 2004
Posts: 7,196 Harrisburg, Pa.
screamindriver
master
|
master
Joined: Feb 2004
Posts: 7,196
Harrisburg, Pa.
|
Quote:
I called their tech line to ask this question, but as soon as I questioned why the shackle could only be used with SS springs, the guy hung up on me. Not sure what that was all about....
Thanks everyone for the feedback!
Dave
That's the techs way of telling you he did'nt know the answer... ..
|
|
|
|
|