Full Undercoating - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Full Undercoating

Print Thread

Full Undercoating #827499 10/11/10 08:07 PM 10/11/10 08:07 PM
Joined: May 2007 Posts: 29 ohio M m300b OP member
m300b OP member M Joined: May 2007 Posts: 29 ohio	66' Belvedere convertible. On a "FULL" undercoat does the whole floor pan get coated? Where do I stop in the engine compartment? Want a low maintenance car. Bottom was blasted and sprayed with 4 coats of Zero-Rust. Thanks 6245227-DSC02830.JPG (87 downloads)

Re: Full Undercoating [Re: m300b] #827500 10/11/10 09:05 PM 10/11/10 09:05 PM
Joined: Jan 2003 Posts: 75,066 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,066 U.S.S.A.	almost the entire floor was undercoated , under the gas tank was not since the gas tank and all the lines and such were installed before undercoating. As far as where to stop up front, right at the seam where the firewall meets the floor pan.

Re: Full Undercoating [Re: JohnRR] #827501 10/11/10 10:11 PM 10/11/10 10:11 PM
Joined: May 2004 Posts: 5,123 Warrenton, VA RoadRunnerJD master
RoadRunnerJD master Joined: May 2004 Posts: 5,123 Warrenton, VA	How about the bottom of the front frame rails and how much gets on the K frame?

Re: Full Undercoating [Re: RoadRunnerJD] #827502 10/12/10 01:39 PM 10/12/10 01:39 PM
Joined: Mar 2008 Posts: 9,550 Sacramento CA M Morty426 master
Morty426 master M Joined: Mar 2008 Posts: 9,550 Sacramento CA	Quote: How about the bottom of the front frame rails and how much gets on the K frame? The K fram would not be in the car at undercoating

Re: Full Undercoating [Re: RoadRunnerJD] #827503 10/12/10 01:53 PM 10/12/10 01:53 PM
Joined: Jan 2003 Posts: 75,066 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,066 U.S.S.A.	Quote: How about the bottom of the front frame rails and how much gets on the K frame? Not really sure, do you want a factory look ? The cars were sprayed by a human standing in a pit, no 2 are the same, I would just run straight across from the firewall seam back. Last edited by JohnRR; 10/12/10 01:54 PM.

Re: Full Undercoating [Re: JohnRR] #827504 10/12/10 03:18 PM 10/12/10 03:18 PM
Joined: Jan 2003 Posts: 27,471 So Cal autoxcuda Too Many Posts
autoxcuda Too Many Posts Joined: Jan 2003 Posts: 27,471 So Cal	How about the before restoration pictures of this particular car??

Re: Full Undercoating [Re: JohnRR] #827505 10/12/10 05:05 PM 10/12/10 05:05 PM
Joined: Oct 2004 Posts: 1,060 Ball Ground GA T TrueTripleX super stock
TrueTripleX super stock T Joined: Oct 2004 Posts: 1,060 Ball Ground GA	Quote: almost the entire floor was undercoated , under the gas tank was not since the gas tank and all the lines and such were installed before undercoating. As far as where to stop up front, right at the seam where the firewall meets the floor pan. Good to know JohnRR. Were the brake lines and body plugs in at this time too?

Re: Full Undercoating [Re: TrueTripleX] #827506 10/12/10 05:18 PM 10/12/10 05:18 PM
Joined: Oct 2006 Posts: 7,371 Iowa burdar Owen's Dad
burdar Owen's Dad Joined: Oct 2006 Posts: 7,371 Iowa	Quote: Were the brake lines and body plugs in at this time too? Yes, all that stuff was installed prior to undercoating. I assume the undercoating was sprayed very shortly before the "body drop" phase of assembly.

Re: Full Undercoating [Re: burdar] #827507 10/12/10 06:54 PM 10/12/10 06:54 PM
Joined: Mar 2008 Posts: 9,550 Sacramento CA M Morty426 master
Morty426 master M Joined: Mar 2008 Posts: 9,550 Sacramento CA	resto rick has an assembly order on his web site that shows about 48 step (things installed) before undercoating

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1