|
|
Flaming river manual gearbox, pitman arm question
#814090
09/25/10 05:59 PM
09/25/10 05:59 PM
|
Joined: Aug 2004
Posts: 3,310
Walnut Creek, CA
blown340
OP
master
|
OP
master
Joined: Aug 2004
Posts: 3,310
Walnut Creek, CA
|
Just a quick question. If I use the flaming river 16:1 manual steering box to replace the power steering in my 71 valiant, will I need a new pitman arm as well?
Thanks,
-Jon
70 challenger convertible. 340/5 speed. blown, intercooled, efi, blah blah blah
71 valiant scamp 318/A833OD/AC/PS
00 dakota RC 4.7L 5 spd autoX'r. SRT10/T56 swap in process
73 W200 Power wagon, PTO winch, 4 spd
|
|
|
Re: Flaming river manual gearbox, pitman arm question
[Re: blown340]
#814091
09/26/10 01:38 AM
09/26/10 01:38 AM
|
Joined: Aug 2004
Posts: 3,310
Walnut Creek, CA
blown340
OP
master
|
OP
master
Joined: Aug 2004
Posts: 3,310
Walnut Creek, CA
|
70 challenger convertible. 340/5 speed. blown, intercooled, efi, blah blah blah
71 valiant scamp 318/A833OD/AC/PS
00 dakota RC 4.7L 5 spd autoX'r. SRT10/T56 swap in process
73 W200 Power wagon, PTO winch, 4 spd
|
|
|
Re: Flaming river manual gearbox, pitman arm question
[Re: blown340]
#814092
09/26/10 01:50 AM
09/26/10 01:50 AM
|
Joined: Jan 2003
Posts: 27,468
So Cal
autoxcuda
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 27,468
So Cal
|
Quote:
Just a quick question. If I use the flaming river 16:1 manual steering box to replace the power steering in my 71 valiant, will I need a new pitman arm as well?
Thanks,
-Jon
What diameter is the output splines on the Flaming River box? If it's the same small diameter style, it the same pitman.
I believe all stock manual 62-76 A-body boxes have the same small output diameter. So I think you will be fine, but I would not assume anything with an aftermarket part/box.
http://www.bigblockdart.com/techpages/moognumbers.shtml
Manual Power
67-72 A body (exc 383) K7074 K7074
73-76 A body K7075 K7076
|
|
|
|
|
|
|
