rocker arm ratio for a stock hemi rocker - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer rocker arm ratio for a stock hemi rocker

Print Thread

rocker arm ratio for a stock hemi rocker #793627 09/05/10 07:11 PM 09/05/10 07:11 PM
Joined: Jan 2003 Posts: 6,391 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,391 Abilene, Texas	What is the stock ratio for a 1970. 1.5 on both intake and exhaust or 1.6.

Re: rocker arm ratio for a stock hemi rocker [Re: fastmark] #793628 09/05/10 08:25 PM 09/05/10 08:25 PM
Joined: Nov 2003 Posts: 2,715 closer to Canadian beer! torkrules I'm neurotic
torkrules I'm neurotic Joined: Nov 2003 Posts: 2,715 closer to Canadian beer!	Quote: What is the stock ratio for a 1970. 1.5 on both intake and exhaust or 1.6. Close to 1.55 on the exhaust and close to 1.6 on the intake. I think they were all over the map (like 1.52/1.57)

Re: rocker arm ratio for a stock hemi rocker [Re: fastmark] #793629 09/05/10 08:25 PM 09/05/10 08:25 PM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	The blueprint spec is 1.57 intake, 1.52 exhaust. You'll find your stock set all over the place. Dave

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1