I never noticed until yesterday when I slapped the rear bumper on, but it looks like the replacement quarter panel should be trimed between the tail light and bumper.
does anyone have a good pic of this area? thanks in advance.
Dan

different view;

Dan,
I looked over the large collection of pictures I have taken of my project. I can get pretty close to the angle you need but not quite... It looks like you have some extra material there but I will get you a better shot tonight. You can also get some reference shots that were taken at the Restoration shop that did the paint for my car. The rear quarters and tail light sections are all factory originals.

http://www.clarkclassic.com/mygallery/index.asp?CatID=31

Jim
68 Hemi Road Runner

Thanks Jim, the link had some good pic's of what I'm looking for. I think I need to trim it to match the rear valance panel ( for lack of the correct term) and I should be good.
Oh and by the way thats a beautiful car ya got there. Is that PP1 paint code ? it looks extremely bright in the pics.
The pic ya posted would show me what I need, if it wasn't so bright very nice .
Dan

Dan,

Thanks, and yes that is PP1 done in Base Coat/Clear Coat. The camera flash coupled with fluorecent shop lighting tends to make it look more orange. The outdoor shots on the website look really good.

Jim

Dan,
Here are some better detail shots of that corner fit. I held up a white backgound for a better contrast. Good luck with your project!!

Jim
68 Hemi Road Runner

#2

Last one. (other side)

dang, Jim those are some nice detailed photos and of a rather nice looking '68 Runner


MikeR

A couple of pics of that area on my 68..

one more