D.U.I. Ignition anyone use this? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer D.U.I. Ignition anyone use this?

Print Thread

D.U.I. Ignition anyone use this? #78520 06/22/08 09:15 PM 06/22/08 09:15 PM
Joined: Apr 2008 Posts: 401 Western Colorado 3 340Scamp OP mopar
340Scamp OP mopar 3 Joined: Apr 2008 Posts: 401 Western Colorado	I was wondering if anyone has experience with the Davis Unified Ignition on a 340. If so does it work well at high rpm's . THANKS!

Re: D.U.I. Ignition anyone use this? [Re: 340Scamp] #78521 06/23/08 12:26 AM 06/23/08 12:26 AM
Joined: Feb 2008 Posts: 711 Montana P Posest super stock
Posest super stock P Joined: Feb 2008 Posts: 711 Montana	I looked into it but went MSD instead. I did not know what my clearance would be in my Dakota and the site said it will not clear the firewall on a Demon.

Re: D.U.I. Ignition anyone use this? [Re: Posest] #78522 06/23/08 06:10 PM 06/23/08 06:10 PM
Joined: Jan 2003 Posts: 3,136 Palm Coast, FL (near Daytona B... Blown_Hemi master
Blown_Hemi master Joined: Jan 2003 Posts: 3,136 Palm Coast, FL (near Daytona B...	I just put one in my 440. Works great, much better than the 2 MSD Off Road boxes that went bad in 2 years. Ask me my opinion of Frank Mitchell....... A Mopar crook!

Re: D.U.I. Ignition anyone use this? [Re: Blown_Hemi] #78523 06/23/08 08:45 PM 06/23/08 08:45 PM
Joined: Apr 2008 Posts: 401 Western Colorado 3 340Scamp OP mopar
340Scamp OP mopar 3 Joined: Apr 2008 Posts: 401 Western Colorado	THANKS! guys but unfortunately I just found out they wont work in a small block A-Body.

Re: D.U.I. Ignition anyone use this? [Re: 340Scamp] #78524 06/24/08 06:30 AM 06/24/08 06:30 AM
Joined: Jan 2003 Posts: 8,140 New Mexico UCUDANT Troll Hunter
UCUDANT Troll Hunter Joined: Jan 2003 Posts: 8,140 New Mexico	I thought this was an igniton interlock thread

Re: D.U.I. Ignition anyone use this? [Re: 340Scamp] #78525 06/24/08 07:55 AM 06/24/08 07:55 AM
Joined: Aug 2004 Posts: 3,547 stratford,ontario,canada JD340 master
JD340 master Joined: Aug 2004 Posts: 3,547 stratford,ontario,canada	Quote: THANKS! guys but unfortunately I just found out they wont work in a small block A-Body. At one time they did offer an A body application. It used a coil mounted separate from the dist cap,IIRC. Last edited by JD340; 06/25/08 09:40 AM. Nothing to see here. Carry on.

Re: D.U.I. Ignition anyone use this? [Re: 340Scamp] #78526 06/24/08 08:52 PM 06/24/08 08:52 PM
Joined: Jan 2003 Posts: 6,816 Alton, IL D Dakota_Don master
Dakota_Don master D Joined: Jan 2003 Posts: 6,816 Alton, IL	just use a mopar (stock dist) and wire a GM module to it.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1