Dumb question-low deck intake on RB engine?????? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Dumb question-low deck intake on RB engine??????

Print Thread

Dumb question-low deck intake on RB engine?????? #738976 07/02/10 07:51 PM 07/02/10 07:51 PM
Joined: Feb 2005 Posts: 5,796 minnarusta TX9H6E4CUDA OP master
TX9H6E4CUDA OP master Joined: Feb 2005 Posts: 5,796 minnarusta	Ok I have a 1959 Imperial dual 4bbl intake on my 383 in my cuda. I just bought a 440 to rebuild and was wondering if there is anyway to make that intake work on the 440 (the only reason is because i think its awesome) So do they make spacers or anything??? For the absolute best powder coating go to J.I.T powder coating, contact infomation is in my personal profile..

Re: Dumb question-low deck intake on RB engine?????? [Re: TX9H6E4CUDA] #738977 07/02/10 07:58 PM 07/02/10 07:58 PM
Joined: Nov 2006 Posts: 1,459 oklahoma F forphorty pro stock
forphorty pro stock F Joined: Nov 2006 Posts: 1,459 oklahoma	the spacers made for the MP stage 6 heads might work

Re: Dumb question-low deck intake on RB engine?????? [Re: TX9H6E4CUDA] #738978 07/02/10 07:59 PM 07/02/10 07:59 PM
Joined: Nov 2006 Posts: 3,407 S.E. Florida, USA rrunner master
rrunner master Joined: Nov 2006 Posts: 3,407 S.E. Florida, USA	Quote: Ok I have a 1959 Imperial dual 4bbl intake on my 383 in my cuda. I just bought a 440 to rebuild and was wondering if there is anyway to make that intake work on the 440 (the only reason is because i think its awesome) So do they make spacers or anything??? Thought the 59 motors were RB's Anyway, there use to be spacers to do this swap, b intake on a RB, but I don't know if they are still avalible. I remember seeing them from Direct Connection many moons ago. I also remember spacers to run RB distributors in B engines, but haven't seen those in a while either. Last edited by rrunner; 07/02/10 08:00 PM.

Re: Dumb question-low deck intake on RB engine?????? [Re: TX9H6E4CUDA] #738979 07/02/10 08:10 PM 07/02/10 08:10 PM
Joined: Jan 2003 Posts: 70,126 Here DirectSubjection Tacohead. The First and Only
DirectSubjection Tacohead. The First and Only Joined: Jan 2003 Posts: 70,126 Here	From Sweptline.org: http://www.sweptline.org/forums/viewtopic.php?f=19&t=2128 If that post is accurate - p5249189- spacers p4876848- valley tray p5249467- gaskets http://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idProduct=1428 Ride eternal, shiny and chrome

Re: Dumb question-low deck intake on RB engine?????? [Re: DirectSubjection] #738980 07/03/10 12:16 PM 07/03/10 12:16 PM
Joined: Mar 2010 Posts: 632 MD-USA D Dodgeguy101 mopar
Dodgeguy101 mopar D Joined: Mar 2010 Posts: 632 MD-USA	I read an article many years ago about taking wood and making spacers to put B intakes on an RB engine. Just figure out what thickness you need and make them, unless you find them already premade.

Re: Dumb question-low deck intake on RB engine?????? [Re: rrunner] #738981 07/03/10 01:46 PM 07/03/10 01:46 PM
Joined: Sep 2007 Posts: 14,889 up yours Supercuda About to go away
Supercuda About to go away Joined: Sep 2007 Posts: 14,889 up yours	Quote: Thought the 59 motors were RB's Just the 59 383's were RB's. They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1