T/A push rods - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer T/A push rods

Print Thread

T/A push rods #728002 06/19/10 11:03 AM 06/19/10 11:03 AM
Joined: Apr 2005 Posts: 123 G.A. 7 70killerbee OP member
70killerbee OP member 7 Joined: Apr 2005 Posts: 123 G.A.	Hello, Does anyone know of anyone who reproduces the T/A style push rods by chance, or does anyone out there have any NOS ones they would like to sell for my project?? Pm me here or email to doogie772007@gmail.com Thank you MOPARTS

Re: T/A push rods [Re: 70killerbee] #728003 06/19/10 02:29 PM 06/19/10 02:29 PM
Joined: Jan 2003 Posts: 5,897 Florida Locomotion master
Locomotion master Joined: Jan 2003 Posts: 5,897 Florida	I'm pretty sure that ball/cup pushrods about 7.21" long are what would work. That's the length usually recommended for any original style small block with hydraulic cam and adjustable rockers. The 273 adjustable rocker/solid lifter engines used pushrods advertised at 7.50". That's the "effective" length - from ball to bottom of the cup, not overall length.

Re: T/A push rods [Re: Locomotion] #728004 06/19/10 03:49 PM 06/19/10 03:49 PM
Joined: Jan 2003 Posts: 1,547 Puyallup, Wa. S Steve340 pro stock
Steve340 pro stock S Joined: Jan 2003 Posts: 1,547 Puyallup, Wa.	Make sure the cup is not too large in diameter or you will get interference with the rocker arm. The T/A original pushrods had a very small cup.

Re: T/A push rods [Re: Steve340] #728005 06/20/10 05:43 AM 06/20/10 05:43 AM
Joined: Apr 2005 Posts: 123 G.A. 7 70killerbee OP member
70killerbee OP member 7 Joined: Apr 2005 Posts: 123 G.A.	Does anyone have any pics of the push rods by chance so I know what these look like?? Thank you

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1