Re: 70 EBODY SENDING UNIT TAG
[Re: HEMICUDA]
#71937
06/12/08 01:15 PM
06/12/08 01:15 PM
|
Joined: Mar 2004
Posts: 1,711 USA
ECS
David Walden
|
David Walden
Joined: Mar 2004
Posts: 1,711
USA
|
Quote:
When is the last time you seen one of these still attached to a sending unit? It's on a super low mile 6pk Cuda in my shop.
Hi Mike, Nice talking to you a couple of days ago! The tag on the sending unit is one that I have been trying to figure out for the past 2 years. We offer these in our product line but they are not yet on our website. (The Challenger project has brought about many new products that we will be offering later this Summer.) There seems to be part numbers for both the 3/8" and the 5/16" gas sending unit on the B & E Body vehicles. I think a California emissions car might have a different part number. I have seen the tag also placed on the larger line that exits the sending unit. There appears to be two different fonts of print. One with the Federal Safety wording and the other without. I have posted a couple of pictures showing an original and how they probably looked when they were new. What plant was your vehicle/sample manufactured at? Thanks.
DW
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: ECS]
#71938
06/12/08 01:39 PM
06/12/08 01:39 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Very neat. It sure would be interesting to see a list of assembly line part #'s as opposed to replacement parts book part #'s to see if there is some correlation, or system to it.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: ECS]
#71939
06/12/08 01:43 PM
06/12/08 01:43 PM
|
Joined: Nov 2004
Posts: 1,923 Medina, Ohio
HEMICUDA
OP
top fuel
|
OP
top fuel
Joined: Nov 2004
Posts: 1,923
Medina, Ohio
|
Quote:
Quote:
When is the last time you seen one of these still attached to a sending unit? It's on a super low mile 6pk Cuda in my shop.
Hi Mike, Nice talking to you a couple of days ago! The tag on the sending unit is one that I have been trying to figure out for the past 2 years. We offer these in our product line but they are not yet on our website. (The Challenger project has brought about many new products that we will be offering later this Summer.) There seems to be part numbers for both the 3/8" and the 5/16" gas sending unit on the B & E Body vehicles. I think a California emissions car might have a different part number. I have seen the tag also placed on the larger line that exits the sending unit. There appears to be two different fonts of print. One with the Federal Safety wording and the other without. I have posted a couple of pictures showing an original and how they probably looked when they were new. What plant was that vehicle/sample manufactured at? Thanks.
DW
The car was built in the Hamtramck plant and it is a December car.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
#71941
06/12/08 02:09 PM
06/12/08 02:09 PM
|
Joined: Apr 2003
Posts: 467 Coon Valley, WI
megaparts
mopar
|
mopar
Joined: Apr 2003
Posts: 467
Coon Valley, WI
|
Quote:
Very neat. It sure would be interesting to see a list of assembly line part #'s as opposed to replacement parts book part #'s to see if there is some correlation, or system to it.
I wonder if the sending units were installed in assembly line tanks when they arrived at the plant. That would make sense for a bunch of different parts #s Cuda or Challenger 5/16 or 3/8 CA or non-CA.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: HEMICUDA]
#71943
06/12/08 02:14 PM
06/12/08 02:14 PM
|
Joined: Mar 2004
Posts: 1,711 USA
ECS
David Walden
|
David Walden
Joined: Mar 2004
Posts: 1,711
USA
|
Quote:
Wait a minute Dave, I just noticed that your tag is completely wrong compared to the only one I can remember.
Your part number is incorrect and it's obvious the color of your paper isn't right because it should be a yellowish brown like the original.
Don't forget, I'm looking at the only one I've ever seen and if it's not exactly like mine than it has to be wrong.
WoW! Thanks for the reality check Mike. For the past few days I had almost forgotten the usual type of responses I get when I post on a particular subject. Nice to be brought back into the fold. I guess I deserved that huh?! I will do my best to fix everything....I promise.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: ECS]
#71945
06/12/08 02:29 PM
06/12/08 02:29 PM
|
Joined: Nov 2004
Posts: 1,923 Medina, Ohio
HEMICUDA
OP
top fuel
|
OP
top fuel
Joined: Nov 2004
Posts: 1,923
Medina, Ohio
|
Quote:
Quote:
Wait a minute Dave, I just noticed that your tag is completely wrong compared to the only one I can remember.
Your part number is incorrect and it's obvious the color of your paper isn't right because it should be a yellowish brown like the original.
Don't forget, I'm looking at the only one I've ever seen and if it's not exactly like mine than it has to be wrong.
WoW! Thanks for the reality check Mike. For the past few days I had almost forgotten the usual type of responses I get when I post on a particular subject. Nice to be brought back into the fold. I guess I deserved that huh?! I will do my best to fix everything....I promise.
That's right pal, get busy! Remember, I have one and if it's not exactly like mine it has to be wrong.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: ECS]
#71947
06/12/08 02:51 PM
06/12/08 02:51 PM
|
Joined: Nov 2004
Posts: 1,923 Medina, Ohio
HEMICUDA
OP
top fuel
|
OP
top fuel
Joined: Nov 2004
Posts: 1,923
Medina, Ohio
|
Quote:
Yes sir I will. Sorry to have bothered you. Can we still be friends or should I find another manufacturing buddy?
(I typed this as we were talking on the phone Mike. Please stop laughing!)
UR KILLIN ME DAVID!! I just got up off the floor.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: ECS]
#71948
06/12/08 02:59 PM
06/12/08 02:59 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Quote:
These assemblies are not listed anywhere in the parts books. You can find the break down on the individual components but not the complete sending unit and tank.
That is what I mean, sort of like how casting #'s on manifolds can be 1 number off of the part # (or the other way around). There should have been some type of system, I guess I just am curious what it may have been, and how it might relate to later parts book information. Handy to know if you have piles of parts with assy line not parts book #'s on them. A good example would be SIA parts like mirror assemblies, it would be nice to be able to id it by the base casting #.
|
|
|
Re: 70 EBODY SENDING UNIT TAG
[Re: cataclysm80]
#71954
06/13/08 10:36 AM
06/13/08 10:36 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Tav, there could be different #'s for Canada/Export as well.
|
|
|
|
|