B body manual master cylinder rod length - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer B body manual master cylinder rod length

Print Thread

B body manual master cylinder rod length #682496 04/28/10 08:55 AM 04/28/10 08:55 AM
Joined: Mar 2009 Posts: 1,058 bigfork mn D dragram440 OP super stock
dragram440 OP super stock D Joined: Mar 2009 Posts: 1,058 bigfork mn	Im converting the brakes on the front of my 67 charger from power drum to manual disc and I got a c body master cylinder and wondering what rod I run in there. 67' charger 499 RB 10.57 at 127

Re: B body manual master cylinder rod length [Re: dragram440] #682497 04/28/10 10:03 AM 04/28/10 10:03 AM
Joined: Oct 2005 Posts: 8,908 Ontario, Canada S Stanton Don't question me!
Stanton Don't question me! S Joined: Oct 2005 Posts: 8,908 Ontario, Canada	Slip the rod on the pedal and poke it out the firewall and measure how much sticks out. poke something in the master and measure the distance to the mounting flange. If the two are the same you're good to go. Otherwise you'll have to either lengthen or shorten the rod. You can make your own adjustable with a connector nut. Cut the rod around the middle. Thread both ends. Put the connector nut on one end and loctite it on (or tack it). Put a locknut on the other end before you thread it into the connector nut. Voila ... adjustable brake rod.

Re: B body manual master cylinder rod length [Re: Stanton] #682498 04/28/10 10:20 AM 04/28/10 10:20 AM
Joined: Jan 2003 Posts: 21,083 Niles , Ohio T therocks oh wait.but hey.lets see.oh yeah.
therocks oh wait.but hey.lets see.oh yeah. T Joined: Jan 2003 Posts: 21,083 Niles , Ohio	Just use the stock rod for manual brakes if you can find one or get the adjustable one.I have that master in 3 early B bodys.No problems and thay are and were all manual brakes.Have that master on a 62 300 with power brakes and the rod for it works also.Rocky Last edited by therocks; 04/28/10 10:21 AM. Chrysler Firepower

Re: B body manual master cylinder rod length [Re: therocks] #682499 04/28/10 01:46 PM 04/28/10 01:46 PM
Joined: Mar 2009 Posts: 1,058 bigfork mn D dragram440 OP super stock
dragram440 OP super stock D Joined: Mar 2009 Posts: 1,058 bigfork mn	Anybody have a extra one? 67' charger 499 RB 10.57 at 127

Re: B body manual master cylinder rod length [Re: dragram440] #682500 04/28/10 02:10 PM 04/28/10 02:10 PM
Joined: Apr 2003 Posts: 3,968 North Riverside IL & Lowell IN GTXKen super gas
GTXKen super gas Joined: Apr 2003 Posts: 3,968 North Riverside IL & Lowell IN	I bought an adjustable rod when I did this, I just can't remember from whom. Maybe Magnum Force?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1