holley experts? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer holley experts?

Print Thread

holley experts? #681920 04/27/10 05:44 PM 04/27/10 05:44 PM
Joined: Sep 2006 Posts: 1,139 West Tennessee R rbstroker OP super stock
rbstroker OP super stock R Joined: Sep 2006 Posts: 1,139 West Tennessee	I am disassembling my Holley 750 DP for freshening. I'll be using the new "non stick" gaskets when I put it back together. Is there any way to get the old original gaskets off without damaging the carb? They are stuck on pretty good and I hesitate scraping too much for fear of messing up the castings. This is the land of the free because of the brave

Re: holley experts? [Re: rbstroker] #681921 04/27/10 06:11 PM 04/27/10 06:11 PM
Joined: Jan 2003 Posts: 5,357 Rancho Cordova, California (Sa... hemi71x master
hemi71x master Joined: Jan 2003 Posts: 5,357 Rancho Cordova, California (Sa...	This stuff works good. 5950410-Permatex.jpg (102 downloads) RF-4C Phantom 69-370 Zweibrucken, Germany

Re: holley experts? [Re: hemi71x] #681922 04/30/10 10:41 AM 04/30/10 10:41 AM
Joined: Jul 2009 Posts: 209 Arkansas beatupcuda enthusiast
beatupcuda enthusiast Joined: Jul 2009 Posts: 209 Arkansas	Take Hemi71x advice, it works. 68 Hemi 4 speed Cuda,,,,building ?

Re: holley experts? [Re: beatupcuda] #681923 04/30/10 10:55 AM 04/30/10 10:55 AM
Joined: Sep 2006 Posts: 1,139 West Tennessee R rbstroker OP super stock
rbstroker OP super stock R Joined: Sep 2006 Posts: 1,139 West Tennessee	Just got some. If it works on my 750 dual feed, I may try freshening my six pack. (We never used it on the Phantoms when I was in the air force in the 60's hahaha) This is the land of the free because of the brave

Re: holley experts? [Re: rbstroker] #681924 04/30/10 11:21 AM 04/30/10 11:21 AM
Joined: Feb 2003 Posts: 21,318 Manitoba, Canada DaytonaTurbo Too Many Posts
DaytonaTurbo Too Many Posts Joined: Feb 2003 Posts: 21,318 Manitoba, Canada	Yep that stuff works, just be sure to let it soak for long enough before you start scraping at it.

Re: holley experts? [Re: DaytonaTurbo] #681925 04/30/10 12:41 PM 04/30/10 12:41 PM
Joined: Dec 2006 Posts: 1,178 Indy FlyFish super stock
FlyFish super stock Joined: Dec 2006 Posts: 1,178 Indy	Side note: if it is a gasket remover that contains dichloromethane (methylene chloride) be aware that it will go through nitrile gloves REAL fast�.nasty stuff�.just FYI. 67 Barracuda street car, 408, e85, 1.38 60', 6.44 @105.9 in the 1/8 mile, 10.19 @130.5 in the 1/4...so far....

Re: holley experts? [Re: FlyFish] #681926 04/30/10 05:29 PM 04/30/10 05:29 PM
Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central RobX4406 I Live Here
RobX4406 I Live Here Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central	Can't find the spray can permatex gasket remover anymore around this part of CA. They have some really junky remover now that doesn't work well. I just bought some yesterday, and it won't be used again. Just like carb cleaner that used to work great. Now you'd be better off spitting on the part and wiping it with a rag.

Re: holley experts? [Re: DaytonaTurbo] #681927 04/30/10 05:54 PM 04/30/10 05:54 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	Quote: Yep that stuff works, just be sure to let it soak for long enough before you start scraping at it. X2, a generous app soaked for at least 10 minutes or more live every 24 hour block of time like it's your last day on earth

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1