looks awsome!

when can i send mine over

Here are some more pics. Most of the parts are now refinished, ready for assembly. I had all the small parts replated as original.
These are the zinc plated parts, done by Jules.

Black zinc and zinc dichromated parts, also done by Jules.

Phosphate coated suspension nuts, bolts, etc.

Galvanized metal parts.

Powder coated suspension parts, rear end housing, etc, done by a local shop that does very nice work.

While the car was at the paint shop, I also restored a lot of the parts, here is the refinished grille. I stripped the grille to bare plastic by glass beading using a very fine glass bead. I used the paint sold by Frank Badalson. I am very happy with the outcome. I tried to duplicate the factory overspray as well.

Grille pic #2.

Grille back side.

Heater box restoration. I removed all the riveted brackets, glass beaded the case and re-finished using a satin clear coat.

Assembled heater box.

Heater box pic #2. I re-applied the factory stamp also.

Steering column all disassembled, every part stripped to bare metal.

Parts refinished, new ignition switch, turnsignal switch, key buzzer switch, ignition lock, bearings, etc.

Assembled steering column.

Very very nice !!!!
Congratulations Barnabas
Jules

Looks awesome! How much did Ready Strip charge for the dip and coating if you don't mind me asking?

Robert.

wow,really REALLY nice.top notch job. from sweden= 10 tumbs up.