Cam help - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cam help

Print Thread

Cam help #612505 02/13/10 03:57 PM 02/13/10 03:57 PM
Joined: Aug 2003 Posts: 407 Great White North Werst coast runya OP mopar
runya OP mopar Joined: Aug 2003 Posts: 407 Great White North Werst coast	looking for input into a cam selection for my Duster. Would like a solid flat tappet. 75 Duster (3000 lbs) 727 auto with a full manual valve body 5000 stall 8" ptc converter 4:56 gears 28" tires 11.5 compression 410 stroker 2" hooker headers Holley Pro Dom tunnel ram 2 600 1850's W2 (2:08 x 1:60 valves minor port work) roller tip rockers (blue MP ones) Limited street Also who is a good company to buy from Thanks in advance Russ

Re: Cam help [Re: runya] #612506 02/13/10 09:45 PM 02/13/10 09:45 PM
Joined: Dec 2007 Posts: 10,542 BROOK PARK, OH WILD BILL Senior Member of the Junior Dragster Club
WILD BILL Senior Member of the Junior Dragster Club Joined: Dec 2007 Posts: 10,542 BROOK PARK, OH

Re: Cam help [Re: runya] #612507 02/14/10 01:29 AM 02/14/10 01:29 AM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Quote: looking for input into a cam selection for my Duster. Would like a solid flat tappet. 75 Duster (3000 lbs) 727 auto with a full manual valve body 5000 stall 8" ptc converter 4:56 gears 28" tires 11.5 compression 410 stroker 2" hooker headers Holley Pro Dom tunnel ram 2 600 1850's W2 (2:08 x 1:60 valves minor port work) roller tip rockers (blue MP ones) Limited street Also who is a good company to buy from Thanks in advance Russ I'd use this: 260-266 @.050, .578-.551 w/1.5 ratio, on a 107lca and 3� advance. It's comp lobes. Brian Hafliger

Re: Cam help [Re: Brian Hafliger] #612508 02/14/10 02:49 PM 02/14/10 02:49 PM
Joined: Aug 2003 Posts: 407 Great White North Werst coast runya OP mopar
runya OP mopar Joined: Aug 2003 Posts: 407 Great White North Werst coast	Thanks Brian, I bought my existing cam from you a couple years back, this looks like the same one. It worked great but I took a lobe out of it so I need to replace it. I sent you a email last week but maybe it has changed. What is the best way to catch up with you for pricing (need new cam and lifters)?

Re: Cam help [Re: runya] #612509 02/14/10 04:14 PM 02/14/10 04:14 PM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Quote: Thanks Brian, I bought my existing cam from you a couple years back, this looks like the same one. It worked great but I took a lobe out of it so I need to replace it. I sent you a email last week but maybe it has changed. What is the best way to catch up with you for pricing (need new cam and lifters)? Do you know what may have caused it to lose a lobe?? Brian Hafliger

Re: Cam help [Re: Brian Hafliger] #612510 02/14/10 06:57 PM 02/14/10 06:57 PM
Joined: Aug 2003 Posts: 407 Great White North Werst coast runya OP mopar
runya OP mopar Joined: Aug 2003 Posts: 407 Great White North Werst coast	I was up on the rev limiter (7000rpm) and it started to pop so I shut it down. When I pulled the valve cover I had one push rod off the rocker cup wedged between the rocker and the head. The only thing I can see is a combination of the clearance set a little to loose, possible valve float with the agressive lobes. Cam was working great up to that point.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1