Mr. Gasket MLS head gaskets - any users? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Mr. Gasket MLS head gaskets - any users?

Print Thread

Page 2 of 2

1

2

Re: Mr. Gasket MLS head gaskets - any users? [Re: Quicksilver440] #608880 02/11/10 09:49 PM 02/11/10 09:49 PM
Joined: Oct 2009 Posts: 1,288 Oregon sg66mopar pro stock
sg66mopar pro stock Joined: Oct 2009 Posts: 1,288 Oregon	Quote: How important is the block surface finish with the nitrile coated gaskets? My problem with it is that my block was surfaced when I built it a few years ago...and I'm not going to pull the motor apart just to refinish the block with a finer finish for MLS gaskets. Very Important!

Re: Mr. Gasket MLS head gaskets - any users? [Re: sg66mopar] #608881 02/11/10 09:59 PM 02/11/10 09:59 PM
Joined: Aug 2003 Posts: 43,252 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,252 Bend,OR USA	Quote: Quote: How important is the block surface finish with the nitrile coated gaskets? My problem with it is that my block was surfaced when I built it a few years ago...and I'm not going to pull the motor apart just to refinish the block with a finer finish for MLS gaskets. Very Important! The instructions with both brands of gaskets tell you to use a cartridge or pill of stop leak from GM, they furnish the part number in the instructions. To bad they don't include the stop leak with the gaskets I had a new hemi motor (the old Mopar brand block, not a World brand block) block leak due to too course on the stock block deck surface from Mopar I ended up having to take the motor apart to have it resurface ot a # 10 RA or smooother finish to make the gaskest seal Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: Mr. Gasket MLS head gaskets - any users? [Re: Cab_Burge] #608882 02/11/10 10:11 PM 02/11/10 10:11 PM
Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60... V VanishPt master
VanishPt master V Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60...	just one "dose" or more?

Re: Mr. Gasket MLS head gaskets - any users? [Re: Cab_Burge] #608883 02/11/10 11:46 PM 02/11/10 11:46 PM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	Quote: The instructions with both brands of gaskets tell you to use a cartridge or pill of stop leak from GM, they furnish the part number in the instructions. To bad they don't include the stop leak with the gaskets I had a new hemi motor (the old Mopar brand block, not a World brand block) block leak due to too course on the stock block deck surface from Mopar I ended up having to take the motor apart to have it resurface ot a # 10 RA or smooother finish to make the gaskest seal Hey cab when i worked at the gm dealer any time a Cadillac with a north star engine came into the shop. no matter what we was doing to it. we would put a couple of the gm collent leak pellets in the rad. If you need me to i can get the part number for them. But does anybody have the part number for the Mr. Gasket MLS head gaskets for a .030 440 with edelbrock 84 cc heads? thanks Mopar65 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1