3.23 sure grip- pros and cons - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 3.23 sure grip- pros and cons

Print Thread

Page 2 of 2

1

2

Re: 3.23 sure grip- pros and cons [Re: CurYellowBird] #593405 01/27/10 02:49 PM 01/27/10 02:49 PM
Joined: Jan 2003 Posts: 5,186 Wherever I am. J Junky master
Junky master J Joined: Jan 2003 Posts: 5,186 Wherever I am.	Performer RPM intake, 750 Holley, Schumacher Tri-Y headers, 346 iron heads with 3 angle valve job. 5763858-Picture008x.jpg (89 downloads) Last edited by Junky; 01/27/10 02:55 PM. 2010 Black Challenger SE <> 3.5 V6 Custom Shift Knobs www.flameball.com Check It Out

Re: 3.23 sure grip- pros and cons [Re: Junky] #593406 01/27/10 03:11 PM 01/27/10 03:11 PM
Joined: Feb 2009 Posts: 583 San Antonio, TX CurYellowBird OP mopar
CurYellowBird OP mopar Joined: Feb 2009 Posts: 583 San Antonio, TX	That's basically the same setup I am shooting for. I'm gonna just get the summit brand headers. How does the RPM performer do off the line and does edelbrock performer or rpm performer have a mounting for the factory choke? One of the guys mentioned how his was sluggish off the line with the intake. I have the 346 heads on my engine to. What do you think of them? Last edited by CurYellowBird; 01/27/10 03:13 PM. Project War Bird: 1971 Plymouth Roadrunner 383 4 speed with air conditioning GY3 Curious yellow All original

Re: 3.23 sure grip- pros and cons [Re: CurYellowBird] #593407 01/27/10 03:16 PM 01/27/10 03:16 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	You have mph but no et. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: 3.23 sure grip- pros and cons [Re: CurYellowBird] #593408 01/27/10 06:15 PM 01/27/10 06:15 PM
Joined: Jan 2003 Posts: 5,186 Wherever I am. J Junky master
Junky master J Joined: Jan 2003 Posts: 5,186 Wherever I am.	Comes off the line just fine for what it is. As far as the heads go, they work just fine for what they are. It all boils down to money and what ya want to spend. 2010 Black Challenger SE <> 3.5 V6 Custom Shift Knobs www.flameball.com Check It Out

Re: 3.23 sure grip- pros and cons [Re: Junky] #593409 01/27/10 06:42 PM 01/27/10 06:42 PM
Joined: Jun 2005 Posts: 2,507 Royersford, PA B bschargerse master
bschargerse master B Joined: Jun 2005 Posts: 2,507 Royersford, PA	I just picked up an XE262 for cheap that someone never installed, thinking of putting it into my '66 Newport 383... Brian - 1971 Dodge Challenger "The Dodge, which was practically stock, just left the Mustang like you wouldn't believe."

Re: 3.23 sure grip- pros and cons [Re: bschargerse] #593410 01/27/10 10:50 PM 01/27/10 10:50 PM
Joined: Jan 2003 Posts: 16,123 Grand Haven, MI patrick I Live Here
patrick I Live Here Joined: Jan 2003 Posts: 16,123 Grand Haven, MI	should work good. with that heavy of a car and with the probably more highway oriented gears, I wouldn't use much more. in my 360 it liked a lot of initial timing (about 18 degrees) 1976 Spinnaker White Plymouth Duster, /6 A833OD 1986 Silver/Twilight Blue Chrysler 5th Ave HotRod SOLD!* 2011 Toxic Orange Dodge Charger R/T 2017 Grand Cherokee Overland 2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1