A body rear ends - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer A body rear ends

Print Thread

A body rear ends #582313 01/14/10 03:30 PM 01/14/10 03:30 PM
Joined: Jan 2010 Posts: 1 Washington state, USA T TeninoAbody OP member
TeninoAbody OP member T Joined: Jan 2010 Posts: 1 Washington state, USA	Guys, I am putting a strange bodied 9 inch under my Duster. The rear will have QA1 coil overs and ladder bars. I have to have the 9 inch cut down to fit and need to know the off set for the center section. The measurements I have take show it to be 1.5 to the passenger side but I really want to be sure before I spend the money to cut this thing up. Thank you in advance

Re: A body rear ends [Re: TeninoAbody] #582314 01/14/10 04:20 PM 01/14/10 04:20 PM
Joined: Jan 2003 Posts: 25,817 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,817 Rio Linda, CA	Stock pinion offset is 1 3/16" to the right (passenger) side. The INTERNET, the MISinformation superhighway

Re: A body rear ends [Re: John_Kunkel] #582315 01/14/10 07:58 PM 01/14/10 07:58 PM
Joined: Oct 2003 Posts: 7,863 Colorado Leadfoot master
Leadfoot master Joined: Oct 2003 Posts: 7,863 Colorado	I thought the axles and the housing lengths were the same on each side and the pinion was offset.

Re: A body rear ends [Re: Leadfoot] #582316 04/14/10 02:59 AM 04/14/10 02:59 AM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog Striving for excellence
Kern Dog Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	The offset is built into the diff, with the pinion yoke sitting 1.75 toward the right as viewed from the rear. The center section is located dead center.

Re: A body rear ends [Re: Kern Dog] #582317 04/14/10 09:26 AM 04/14/10 09:26 AM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	Are we saying the 9" furd pinion offset is 1&3/16" and ours is 1.75" ?? live every 24 hour block of time like it's your last day on earth

Re: A body rear ends [Re: RapidRobert] #582318 04/14/10 11:06 AM 04/14/10 11:06 AM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	Stock Mopar pinion offset is 1 3/16". Contact info

Re: A body rear ends [Re: DoctorDiff] #582319 04/15/10 02:10 AM 04/15/10 02:10 AM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog Striving for excellence
Kern Dog Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	I am going to defer to the Doctor, He hasn't steered me wrong yet.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1