|
Re: 68 SPORT SATELLITE PROJECT UNDERWAY FOR DAD
[Re: BEEQUIK]
#518737
09/12/10 11:34 PM
09/12/10 11:34 PM
|
Joined: Feb 2004
Posts: 2,495
Richmond , Virginia
BEEQUIK
OP
top fuel
|
OP
top fuel
Joined: Feb 2004
Posts: 2,495
Richmond , Virginia
|
I will give it all a quik run over with some 180 grit on the D/A and then time for epoxy primer,heavy fill and a quick block sand and then paint.Should only take another year or two at the rate I'm going!  AND I have to figure out what color to paint it!!Any suggestions??
Last edited by BEEQUIK; 09/12/10 11:38 PM.
|
|
|
Re: 68 SPORT SATELLITE PROJECT UNDERWAY FOR DAD
[Re: BEEQUIK]
#518738
09/12/10 11:44 PM
09/12/10 11:44 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
TX9 black 
|
|
|
Re: 68 SPORT SATELLITE PROJECT UNDERWAY FOR DAD
[Re: ]
#518739
09/13/10 12:03 AM
09/13/10 12:03 AM
|
Joined: Feb 2004
Posts: 2,495
Richmond , Virginia
BEEQUIK
OP
top fuel
|
OP
top fuel
Joined: Feb 2004
Posts: 2,495
Richmond , Virginia
|
Quote:
TX9 black
Not over the top of MY bodywork! 
|
|
|
Re: 68 SPORT SATELLITE PROJECT UNDERWAY FOR DAD
[Re: Bill_T]
#518742
09/14/10 10:06 PM
09/14/10 10:06 PM
|
Joined: Feb 2004
Posts: 2,495
Richmond , Virginia
BEEQUIK
OP
top fuel
|
OP
top fuel
Joined: Feb 2004
Posts: 2,495
Richmond , Virginia
|
Quote:
what did you do to strip out the cowl area? I have had a heck of a time getting the paint out from in between all the bars....
I use what I call"the black death wheel" in a cutoff tool. Be careful using this and wear a face shield.It took me about 10 minutes and 3 wheels to strip the whole cowl panel. Here's a picture of my apparatus...
P.S.- they can be had at wally world or advance auto or autozone for about 6 bucks each with the arbor already made onto them or in bulk at the auto paint store in a ten pack.
|
|
|
|
|
