4150 to 4500 series adaptors - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 4150 to 4500 series adaptors

Print Thread

Page 1 of 2

1

2

4150 to 4500 series adaptors #512431 10/31/09 04:47 PM 10/31/09 04:47 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	who sells the shortest adaptor to convert my 4150 series manifold into a 4500 series dominator manifold? i recall there was a nice black plastic flowed unit out there but can't find who sells it. can't anybody enlighten me please?

Re: 4150 to 4500 series adaptors [Re: rebel] #512432 10/31/09 06:27 PM 10/31/09 06:27 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Well there is this one http://www.summitracing.com/parts/MRG-1930/

Re: 4150 to 4500 series adaptors [Re: Dodgem] #512433 10/31/09 06:43 PM 10/31/09 06:43 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	If you are serious about performance,avoid the Mr.Gasket short adaptor.I tried one a couple years ago,and the transition is horrible, and the bent studs are about impossible to use. I'm not trying to bust anyone's chops,just real world experience. I ended up buying a Wilson's Manifolds 1" one that is real nice,but pretty expensive. Keith www.dunnuckracing.com

Re: 4150 to 4500 series adaptors [Re: Dunnuck Racing] #512434 10/31/09 07:17 PM 10/31/09 07:17 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	Quote: I ended up buying a Wilson's Manifolds 1" one that is real nice,but pretty expensive. Keith you have a part # for that keith? i looked at their site & only spotted a 1.5 ht unit. they look like good products.

Re: 4150 to 4500 series adaptors [Re: rebel] #512435 10/31/09 08:30 PM 10/31/09 08:30 PM
Joined: Jun 2004 Posts: 1,496 Sask, Can. 7 72demon416 pro stock
72demon416 pro stock 7 Joined: Jun 2004 Posts: 1,496 Sask, Can.	I've got a 1.25" one from Promax carbs that seems ok.

Re: 4150 to 4500 series adaptors [Re: 72demon416] #512436 10/31/09 08:45 PM 10/31/09 08:45 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	I will have to go look at it and get a part #. Maybe I am wrong on the height,I remember it being the shortest one I could find at the time,other than the Mr. Gasket deal. Keith www.dunnuckracing.com

Re: 4150 to 4500 series adaptors [Re: Dunnuck Racing] #512437 10/31/09 08:52 PM 10/31/09 08:52 PM
Joined: Jun 2004 Posts: 1,496 Sask, Can. 7 72demon416 pro stock
72demon416 pro stock 7 Joined: Jun 2004 Posts: 1,496 Sask, Can.	If you need a picture of it just let me know. Rick

Re: 4150 to 4500 series adaptors [Re: 72demon416] #512438 10/31/09 09:54 PM 10/31/09 09:54 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	Quote: If you need a picture of it just let me know. Rick need a pic Rick & a part# if you have one. thanx

Re: 4150 to 4500 series adaptors [Re: rebel] #512439 10/31/09 10:34 PM 10/31/09 10:34 PM
Joined: Jun 2004 Posts: 1,496 Sask, Can. 7 72demon416 pro stock
72demon416 pro stock 7 Joined: Jun 2004 Posts: 1,496 Sask, Can.	Sorry I don't have a part# and promax's site seems to be under construction right now but heres a pic of it. 5578981-IMG_3211-1.jpg (104 downloads)

Re: 4150 to 4500 series adaptors [Re: 72demon416] #512440 10/31/09 11:05 PM 10/31/09 11:05 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	Sorry about that,mine is part# 027030,and it is 1.5 inches.I bought it to replace a Moroso that was supposed to be 2 inches but was really 2 1/8". If Promax has a shorter one,it is probably a better deal.If I remember correctly,the Wilson was over $100.00. www.dunnuckracing.com

Re: 4150 to 4500 series adaptors [Re: Dunnuck Racing] #512441 10/31/09 11:35 PM 10/31/09 11:35 PM
Joined: Jun 2004 Posts: 1,496 Sask, Can. 7 72demon416 pro stock
72demon416 pro stock 7 Joined: Jun 2004 Posts: 1,496 Sask, Can.	At 1.25" the promax is the shortest I know of that doesn't look like a complete turd. Seems to me that it was around $85.00 but that may have changed since I last looked at the price list.

Re: 4150 to 4500 series adaptors [Re: 72demon416] #512442 11/01/09 01:49 AM 11/01/09 01:49 AM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	whats the Promax unit made from? it looks like a type of plastic. if so can it also act as a carb insulator? don't spose you have a pic of the wilson unit?

Re: 4150 to 4500 series adaptors [Re: rebel] #512443 11/01/09 02:14 AM 11/01/09 02:14 AM
Joined: Jun 2004 Posts: 1,496 Sask, Can. 7 72demon416 pro stock
72demon416 pro stock 7 Joined: Jun 2004 Posts: 1,496 Sask, Can.	Your right the promax is is a phenolic spacer, I've only seen the wilson on their website.

Re: 4150 to 4500 series adaptors [Re: 72demon416] #512444 11/01/09 03:03 AM 11/01/09 03:03 AM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	thanx for your info on that Rick. i'll e-mail promax & see what the goss is on these things.

Re: 4150 to 4500 series adaptors [Re: rebel] #512445 11/01/09 10:19 AM 11/01/09 10:19 AM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	The Wilson is billet aluminum,the inside is tapered like the Moroso cast one. The outside of it is profile milled. I can take a picture of it later if you want one. www.dunnuckracing.com

Re: 4150 to 4500 series adaptors [Re: rebel] #512446 11/01/09 12:23 PM 11/01/09 12:23 PM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Quote: whats the Promax unit made from? it looks like a type of plastic. if so can it also act as a carb insulator? don't spose you have a pic of the wilson unit? Here is a link to the Wilson. http://www.wilsonmanifolds.com/shop/index.php?l=product_detail&p=9 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: 4150 to 4500 series adaptors [Re: rebel] #512447 11/01/09 01:26 PM 11/01/09 01:26 PM
Joined: Nov 2005 Posts: 656 Kokomo, IN 540dust mopar
540dust mopar Joined: Nov 2005 Posts: 656 Kokomo, IN	This would be my recommendation, it looks like you would have the hood clearance. I have experimented with the "super sucker" style expensive adapters and the Moroso open is equal or better at the track for me on an Indy manifold. What manifold are you running ? http://www.jegs.com/i/Moroso/710/65000/10002/-1

Re: 4150 to 4500 series adaptors [Re: 540dust] #512448 11/01/09 01:44 PM 11/01/09 01:44 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	Quote: What manifold are you running ? i've got the indy 400 manifold & hood clearence is tight. but i could go with a shorter air cleaner if push came to shove.

Re: 4150 to 4500 series adaptors [Re: rebel] #512449 11/01/09 02:02 PM 11/01/09 02:02 PM
Joined: Nov 2005 Posts: 656 Kokomo, IN 540dust mopar
540dust mopar Joined: Nov 2005 Posts: 656 Kokomo, IN	I never ran an air cleaner on a race car but I can understand why one would want to.

Re: 4150 to 4500 series adaptors [Re: 540dust] #512450 11/02/09 01:46 PM 11/02/09 01:46 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	got an e-mail from promax this morning. $175 for there adaptor!!!! wow, do you think it's worth it?

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1