Steel roller rockers for Stage VI? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Steel roller rockers for Stage VI?

Print Thread

Steel roller rockers for Stage VI? #498410 10/16/09 07:02 AM 10/16/09 07:02 AM
Joined: Sep 2005 Posts: 176 Down under S slantman OP member
slantman OP member S Joined: Sep 2005 Posts: 176 Down under	Does anybody know of any steel roller rockers with offset intake to suit Stage VI heads (0.45" offset)? I know I can get aluminium rockers, such as HS, but would prefer steel for street use with a solid roller cam.

Re: Steel roller rockers for Stage VI? [Re: slantman] #498411 10/16/09 08:44 AM 10/16/09 08:44 AM
Joined: Jan 2003 Posts: 75,043 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,043 U.S.S.A.	Stage 6's use a std offset rocker , what's your spring pressure? There are only 2 steel roller tip rockers that are any good , Comp pro magnums and RAS , I think the RAS is a bushed rocker .

Re: Steel roller rockers for Stage VI? [Re: JohnRR] #498412 10/16/09 09:10 AM 10/16/09 09:10 AM
Joined: Sep 2005 Posts: 176 Down under S slantman OP member
slantman OP member S Joined: Sep 2005 Posts: 176 Down under	From memory, the spring pressure is 200# on the seat and 500# on the nose. I'm not actually using Stage 6 heads, I have a set of 518M heads that have been modified and require offset intake rockers. An offset of either 0.450" or 0.485"should work on these heads. I was lead to believe that the Stage 6 heads used a 0.450" offset intake.

Re: Steel roller rockers for Stage VI? [Re: JohnRR] #498413 10/16/09 09:11 AM 10/16/09 09:11 AM
A Anonymous Unregistered
Anonymous Unregistered A	Quote: Stage 6's use a std offset rocker , what's your spring pressure? There are only 2 steel roller tip rockers that are any good , Comp pro magnums and RAS , I think the RAS is a bushed rocker . i'm pretty sure the stage 6 uses a .450 offset intake rocker.

Re: Steel roller rockers for Stage VI? #498414 10/16/09 10:51 AM 10/16/09 10:51 AM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Quote: Quote: Stage 6's use a std offset rocker , what's your spring pressure? There are only 2 steel roller tip rockers that are any good , Comp pro magnums and RAS , I think the RAS is a bushed rocker . i'm pretty sure the stage 6 uses a .450 offset intake rocker. Depends on the version of Stage VI. The standard-port version(s) use a standard-offset intake & exhaust; the MW version needs the .485" intake offset. If the heads in question use standard-offset rockers, the best bet IMO is the RAS stainless-steel setup. Not cheap, but basically bullet-proof for that configuration.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1