What color loc tite do you guys recomend for the convertor bolts ?

RED.......

Thanks .........

Yup red you may have to heat slightly with a propane torch to remove but after years of loose converter bolts i find that no problem.

I use the stuff in the blue container. I don't have to heat it up to remove.

There are a cupple of red loc-tites #271 is what I would use

You can tell us guys that take ours apart more often

I use red and have no problem getting the bolts out I have never even used heat

271 (red) Make sure to remove all traces of grease and oil or your wasting your time.

Blue, if you want to be able to remove it without a hassle, especailly if there the small bolts like the stock ones

Red on a 6 bolt crank flexplate and 5/16 vert bolts, blue on an 8 bolt and the 7/16 bolts.

I allways figure if it needs loctite, it may as well be real loctite, never really had to heat anything to get apart, just allways careful to not round off the head. Red for me, I use blue for aluninum.

I found this on the Loctite website,,,,

RED


OEM specified as 271

High temperature, high strength for heavy duty applications

Designed for larger fasteners 3/8" to 1" (9.5mm to 25mm)

Locks studs, bushings and large fasteners against vibration loosening

Strengthens slip and light press fits

Removable with heat and hand tools


BLUE


Locks threaded fasteners against vibration loosening

Ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm)

Prevents threads from rusting and leaking

Removable with hand tools for easy disassembly

Temperature range: -65 degrees to 300 degrees Fahrenheit (-54 degrees to 149 degrees Celsius

Blue is a good for most any thing,,271 red is if it absolutly, posativly, has to keep from coming apart, either will work but 271 is stronger.

RED !!

If you absolutely, positively dont ever want it to come apart, there is a green loctite that will not let it come apart without a maximum amount of effort.