Hemi Help???? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hemi Help????

Print Thread

Hemi Help???? #432538 08/09/09 03:03 PM 08/09/09 03:03 PM
Joined: Dec 2007 Posts: 576 Somewhere Over the Hill M Mr. Dodge OP mopar
Mr. Dodge OP mopar M Joined: Dec 2007 Posts: 576 Somewhere Over the Hill	I found a guy that has a 588ci Hemi... The heads are a set of Dart hemi heads; For the life of me I cannot find info on the heads, can some one here give me the 411 on these heads??? Are they a good heads or junk. I googled and found nothing I even went to Dart cylinder heads website and they didn't have a peep about them Thanks "The advantage of being armed the Americans possess over the people of all other nations,which are carried as far as the public resources will bear, the governments are afraid to trust the people with arms."(James Madison) 69 Hemi Coronet R/T 70 456 Dart Swinger

Re: Hemi Help???? [Re: Mr. Dodge] #432539 08/09/09 05:20 PM 08/09/09 05:20 PM
Joined: Aug 2003 Posts: 43,305 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,305 Bend,OR USA	Call Dart with the casting numbers on those heads and talk to there technical dept. I had to do that several years ago on a project that the customer had been acumilating the parts for years They are very helpful, they use to make cast heads for blown fuel and the other all out blown Hemi classes, not any more due to the billet heads in those classes now Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Post deleted by Defbob [Re: Mr. Dodge] #432540 08/09/09 06:06 PM 08/09/09 06:06 PM
A Anonymous Unregistered
Anonymous Unregistered A

Re: Hemi Help???? #432541 08/09/09 06:11 PM 08/09/09 06:11 PM
Joined: Dec 2007 Posts: 576 Somewhere Over the Hill M Mr. Dodge OP mopar
Mr. Dodge OP mopar M Joined: Dec 2007 Posts: 576 Somewhere Over the Hill	The heads are on a naturally aspirated Hemi, 0 miles. The guy who has the engine had the heads when he built the bottom end and used these heads to finish it off. "The advantage of being armed the Americans possess over the people of all other nations,which are carried as far as the public resources will bear, the governments are afraid to trust the people with arms."(James Madison) 69 Hemi Coronet R/T 70 456 Dart Swinger

Post deleted by Defbob [Re: Mr. Dodge] #432542 08/09/09 06:16 PM 08/09/09 06:16 PM
A Anonymous Unregistered
Anonymous Unregistered A

Re: Hemi Help???? [Re: Mr. Dodge] #432543 08/09/09 08:54 PM 08/09/09 08:54 PM
Joined: Dec 2007 Posts: 12,592 Great Neck,LI,new york hemi-itis I Live Here
hemi-itis I Live Here Joined: Dec 2007 Posts: 12,592 Great Neck,LI,new york	I suggest you ask the owner if he has any info on the heads or if he has a flow sheet for them.If any good porter had his hands on them they should have something stamped in the aluminum. 5406910-DSC00709r3.jpg (55 downloads) HEMI-ITIS has no cure. My condition is fully BLOWN!!

Re: Hemi Help???? #432544 08/09/09 10:29 PM 08/09/09 10:29 PM
Joined: Dec 2007 Posts: 576 Somewhere Over the Hill M Mr. Dodge OP mopar
Mr. Dodge OP mopar M Joined: Dec 2007 Posts: 576 Somewhere Over the Hill	Quote: Quote: The heads are on a naturally aspirated Hemi, 0 miles. The guy who has the engine had the heads when he built the bottom end and used these heads to finish it off. it still means nothing. none of these heads were ever used as delivered or out of the box. there's a good chance no two sets would ever be alike.nearly every builder had there own porter doing his own special tricks. Some of tghese heads were done before there weree flow benches and by today's standards totally junk Okay Fred, As of now I have nothing I will ask him to pull off the heads and see if there are any stampings.....I'll see If He has any more heads laying around.... If by chance the heads are virgin, would a good port job on them help or should I look for another set of heads?? "The advantage of being armed the Americans possess over the people of all other nations,which are carried as far as the public resources will bear, the governments are afraid to trust the people with arms."(James Madison) 69 Hemi Coronet R/T 70 456 Dart Swinger

Re: Hemi Help???? [Re: Mr. Dodge] #432545 08/09/09 10:31 PM 08/09/09 10:31 PM
A Anonymous Unregistered
Anonymous Unregistered A	we have two sets of dart heads one set are 16 plug heads and they are not ported ran then in the 68 cuda for four years, The ports are rasied 3/4 in. the engine we have in the roadrunner has single plug heads they are ported the engine is a 484 made 794hp. the bigest problem we had is getting headers to fit had to us a hammer to get them on roger moore

Re: Hemi Help???? #432546 08/19/09 02:15 PM 08/19/09 02:15 PM
Joined: Dec 2007 Posts: 576 Somewhere Over the Hill M Mr. Dodge OP mopar
Mr. Dodge OP mopar M Joined: Dec 2007 Posts: 576 Somewhere Over the Hill	I talked to the owner of the hemi.... The heads only have a gasket match on them. The heads were only used as a set of test heads and ran once and shelved. "The advantage of being armed the Americans possess over the people of all other nations,which are carried as far as the public resources will bear, the governments are afraid to trust the people with arms."(James Madison) 69 Hemi Coronet R/T 70 456 Dart Swinger

Re: Hemi Help???? [Re: Mr. Dodge] #432547 08/19/09 02:22 PM 08/19/09 02:22 PM
Joined: Jan 2004 Posts: 4,866 North of Detroit HemiDart68 master
HemiDart68 master Joined: Jan 2004 Posts: 4,866 North of Detroit	We have a set of Dart heads on my dads superstock motor. made awesome power and flow numbers. All depends on what was done to them, but they can be very good heads. In God we trust, all others pay cash. www.lightnens.com (Home of the world's fastest Paint Job)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1