using a v-10 for drag racing - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech using a v-10 for drag racing

Print Thread

using a v-10 for drag racing #372677 07/11/09 07:16 PM 07/11/09 07:16 PM
Joined: Apr 2005 Posts: 37 illinois,u.s. B beezer OP member
beezer OP member B Joined: Apr 2005 Posts: 37 illinois,u.s.	I know that the v-10 ignition and injection would have to go, but what would you replace it with? I figure a good porting job on a set of heads, a home brewed tunnel ram, some good pistons, would probably make decent power.

Re: using a v-10 for drag racing [Re: beezer] #372678 07/11/09 07:25 PM 07/11/09 07:25 PM
Joined: Nov 2003 Posts: 2,273 Greenville, South Carolina BBLM23 top fuel
BBLM23 top fuel Joined: Nov 2003 Posts: 2,273 Greenville, South Carolina	Probably not what you had in mind: Walter 1969 Dart Swinger w/ARC Pump Gas 493 B1/BS 10.18 at 130mph Racing Pro in street trim. 1981 Aries ARC 548 B1 8.88 at 147mph (footbraking) 1996 Ram 2500 V10 16.52 at 80mph 1981 Reliant 400

Re: using a v-10 for drag racing [Re: BBLM23] #372679 07/11/09 07:37 PM 07/11/09 07:37 PM
Joined: Jan 2003 Posts: 945 La Vernia, Texas Pat7272 super stock
Pat7272 super stock Joined: Jan 2003 Posts: 945 La Vernia, Texas	haha id love to see a Viper engine with split dominators!

Re: using a v-10 for drag racing [Re: Pat7272] #372680 07/11/09 07:43 PM 07/11/09 07:43 PM
A Anonymous Unregistered
Anonymous Unregistered A	Somebody over on HAMB was saying someone "did" one with a pair of Audi 5 banger distributors

Re: using a v-10 for drag racing #372681 07/11/09 08:14 PM 07/11/09 08:14 PM
Joined: Dec 2008 Posts: 1,285 okla. sam64 pro stock
sam64 pro stock Joined: Dec 2008 Posts: 1,285 okla.	the article was either in mopar action or mopar muscle.it was in a rail,went to the shitter and found the mag,dec 2000 mopar action has a v 10 cuda and the dragster.

Re: using a v-10 for drag racing [Re: sam64] #372682 07/11/09 09:27 PM 07/11/09 09:27 PM
Joined: Aug 2005 Posts: 761 KY J juicedcuda super stock
juicedcuda super stock J Joined: Aug 2005 Posts: 761 KY	Just get on the viper forums. 1970 Plymouth 'Cuda 1970 Plum Crazy "Gold Duster" 1973 Gold Duster

Re: using a v-10 for drag racing [Re: Pat7272] #372683 07/11/09 10:29 PM 07/11/09 10:29 PM
Joined: Sep 2008 Posts: 2,840 Flint, Michigan B1Fish540 master
B1Fish540 master Joined: Sep 2008 Posts: 2,840 Flint, Michigan	Quote: haha id love to see a Viper engine with split dominators! That would be cool..with a nice hogans sheet metal tunnel ram 15 to 1 cr and a 800 lift cam.

Re: using a v-10 for drag racing [Re: BBLM23] #372684 07/12/09 01:03 PM 07/12/09 01:03 PM
Joined: Aug 2005 Posts: 761 KY J juicedcuda super stock
juicedcuda super stock J Joined: Aug 2005 Posts: 761 KY	My buddy just finished putting a twin turbo kit on a stock viper motor and made ~780 hp and ~850 ft lbs to the rear wheels only on 9 psi. And the stock bottom end can take a little more boost than that. Then to the built motor. Last edited by juicedcuda; 07/12/09 01:05 PM. 1970 Plymouth 'Cuda 1970 Plum Crazy "Gold Duster" 1973 Gold Duster

Re: using a v-10 for drag racing [Re: B1Fish540] #372685 07/12/09 01:04 PM 07/12/09 01:04 PM
Joined: Jan 2003 Posts: 945 La Vernia, Texas Pat7272 super stock
Pat7272 super stock Joined: Jan 2003 Posts: 945 La Vernia, Texas	Quote: That would be cool..with a nice hogans sheet metal tunnel ram 15 to 1 cr and a 800 lift cam. Thats what I'm talkin about!

Re: using a v-10 for drag racing [Re: juicedcuda] #372686 07/12/09 01:05 PM 07/12/09 01:05 PM
Joined: Jan 2003 Posts: 945 La Vernia, Texas Pat7272 super stock
Pat7272 super stock Joined: Jan 2003 Posts: 945 La Vernia, Texas	Juiced was that a Viper V10 or a truck motor?

Re: using a v-10 for drag racing [Re: Pat7272] #372687 07/12/09 01:07 PM 07/12/09 01:07 PM
Joined: Aug 2005 Posts: 761 KY J juicedcuda super stock
juicedcuda super stock J Joined: Aug 2005 Posts: 761 KY	I believe it is a 97 Viper GTS, I will try to find the video of it on the dyno. Last edited by juicedcuda; 07/12/09 01:08 PM. 1970 Plymouth 'Cuda 1970 Plum Crazy "Gold Duster" 1973 Gold Duster

Re: using a v-10 for drag racing [Re: juicedcuda] #372688 07/12/09 03:01 PM 07/12/09 03:01 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	This was in Ontario was for sale years back used truck V 10 not the viper and according to him the are way different animals 5348046-v10.jpg (201 downloads)

Re: using a v-10 for drag racing [Re: beezer] #372689 07/12/09 03:09 PM 07/12/09 03:09 PM
Joined: Nov 2003 Posts: 6,293 Rock Springs Bob_Coomer master
Bob_Coomer master Joined: Nov 2003 Posts: 6,293 Rock Springs	Quote: I know that the v-10 ignition and injection would have to go, but what would you replace it with? I figure a good porting job on a set of heads, a home brewed tunnel ram, some good pistons, would probably make decent power. Nope It would be cheaper, and make more power with a RB stroker. But you probably didnt want to hear that. [color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]

Re: using a v-10 for drag racing [Re: Dodgem] #372690 07/12/09 04:29 PM 07/12/09 04:29 PM
Joined: Nov 2004 Posts: 2,119 sc T tjmarcus1 top fuel
tjmarcus1 top fuel T Joined: Nov 2004 Posts: 2,119 sc	Quote: This was in Ontario was for sale years back used truck V 10 not the viper and according to him the are way different animals speaking of carb over port alignment.......

Re: using a v-10 for drag racing [Re: B1Fish540] #372691 07/12/09 08:19 PM 07/12/09 08:19 PM
Joined: Nov 2004 Posts: 3,619 Norwich CT USA Defbob master
Defbob master Joined: Nov 2004 Posts: 3,619 Norwich CT USA	Quote: Quote: haha id love to see a Viper engine with split dominators! That would be cool..with a nice hogans sheet metal tunnel ram 15 to 1 cr and a 800 lift cam. look in the Hogan catalog. they have a picture of a sheetmetal intake, but I think it takes a throttle body

Re: using a v-10 for drag racing [Re: Dodgem] #372692 07/13/09 08:11 AM 07/13/09 08:11 AM
Joined: Apr 2005 Posts: 37 illinois,u.s. B beezer OP member
beezer OP member B Joined: Apr 2005 Posts: 37 illinois,u.s.	I remember reading about that dragster and I thought that's the way I would want to do it.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1