65 Valiant 200. Was a stock eliminator car with 273 but now has a 60 over 340 with Ross Pistons, Manley rods, steel crank, Bullet Solid Lifter Cam, Air Wolf Heads, 904 trans with 2.74 first gear, 8" Ultimate Converter, Turbo Action reverse manual valve body, Chrome Moley cage, Billet Specialty Wheels. Runs mid 10 seconds. $21,500 including open trailer. Will separate. Call Billy Bellafatto for more info. 914 649-7585
SOLD

1966 Dodge Coronet
Street/ Strip Car - ROLLING

- Complete Moser Dana 60/ 35 Spline Axles/ Spool/ 4.56 Gears/ 3” mild steel driveshaft/ Wilwood discs up front/ Drums in rear/ Super stock springs
- Tubular front a arms/ Steering box support
- 8pt mild steel cage
- Springs moved inboard/ stock wheel tubs widened
- Custom steel wheels in back with like new MT 29.5x10.5W/ Cragar SS in front with new MT sportsman’s - Also have Weld Draglites with 9" radials for the rear if you so choose!
- 15 Gallon aluminum cell/ Holley HP150 pump
- MSD 7AL2/ Crank trigger
- Full bench seat interior (front and rear seats)/ Nice headliner, dash and door panels/ Carpet needs replaced (Comes with brand new kit)
- Optima red top battery in trunk
- All lights and turn signals work
- Paint is older, engine bay paint is original and faded. New bumpers. Car cleans up really nice!
- NO RUST! Straight car
- Underneath is painted white. No undercoating
- 3' Mild Steel Driveshaft
- BBM Hooker Super Comp headers with Bullet mufflers
- VFN lift off hood with 5” hemi scoop. Also comes with steel hood and stock size hemi scoop painted to match the car. Hinges included



Car can be bought multiple ways:
Rolling - $15K
Rolling w/fresh 727 Trans - $17K

Located in Johnstown, OH
Clear title in my name
PM me here or call 614-395-2746

Im looking to sell my valiant the engine is a 426 cubic inch 6.4 gen3 hemi with eagle crank and dss pistons with manley power adder rods with the 6.4 heads that have been ported with good valves. The engine was built for boost. It has a precision promod 98 mm turbo The transmission is an aftermarket reid case power glide and a dana 60 rearend and ladder bars. It made 1500 hp at the back wheels im asking $55,000 you can contact me at 502-262-4708 thanks