for sale 4500 8896 dominator. worked by Don's carbs. flow sheet has all specs . asking $575 plus shipping. pm me or email dart10ss@aol.com

SOLD

360 small block Mopar dry sump pan. Big box style steel pan with four pickups. Pan is new, never used. Bought it for a project and then decided to go a different way. I'll sell the pan for $100 plus whatever it takes to ship it. PM me on the board, PayPal works best for payment.

SOLD

Cast iron water pump housing for 1965 Hemi or Wedge engine. This housing has the alternator bolt up high in the early location and the casting number is correct for a 1965 Hemi or Wedge. Would be correct for a 1965 street wedge 426 engine but could be used on other applications also. Asking $75 plus shipping. PM me on the board, PayPal works best for payment.

CFE sheet tunnelram for RB with std port window head 2x4150 pattern. Linkage is included $1500 firm.

I can do some 'packaging' with these parts and other unlisted associated parts not listed depending on your needs. I'm about 25miles North of Detroit, Michigan 48316.
1)SOLD
2)SOLD
3)SOLD

4)"B" engine '451' reciprocating kit: Good std 440 crank core/NEW BME 6.76 rods/4.375" JE pistons with pins (good used) $1200

5)1971 440 block partial fill std bore, good used ALLOY caps, bushed/indexed lifter bores $850 (needs finish machining)

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the description. The roller wheel size is ~ 0.80”.

The price for the 11 pairs is $650 shipped in the lower 48 States. I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my measurement.

Price for the set is $480 shipped in the lower 48 states. I will ship internationally for the extra cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 16 new Erson big block Mopar roller lifters in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. They are not designed for pushrod oiling.

Note I do not have the shafts for these rocker arms. These rockers use an 11/16” hardened shaft that oil the rockers through the head pedestal.

These rocker arms are very difficult to find. Price is $480 for the 16 rocker arms shipped in the lower 48 states. I will ship internationally for the extra shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have two new W2 cylinder head castings for sale.

One new individual W2 race head casting number P5249769. This head has had some preliminary machining including to the valve spring seat and valve cover gasket rail. This head requires the use of T&D or Jesel rocker systems. Price is $580 plus shipping.

One new individual W2 race head casting number P4532693. This head has had no machining performed. As delivered by Mopar. This head requires the use of T&D or Jesel rocker systems. Price is $580 plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 12 new Mopar Performance 1.5 ratio roller rocker arms for W2 econo heads. This set has the 8 exhaust rockers and 4 left intake rockers. Left intake part number is P4532859 and the Exhaust part number is P4532860.I do not have any right intake rockers. $520 shipped in the lower 48 states

I also have 16 new Mopar Performance 1.5 ratio roller W2 exhaust rocker arms for the W2 & W5 Race heads using offset drilled blocks and shafts. I will sell individual rockers or sets of 2, 4,6 or 8 as needed. Individual rockers are $40 each plus shipping.

I will ship internationally for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.
.

I have a nice used Edelbrock Torker II single plane intake manifold. All thread holes are good. No heli coils. No porting has been performed to the ports or plenum. No pitting on the intake faces or the thermostat housing.

Price is $210 plus shipped in the lower 48 states.

I also have a few other used single plane intakes available from Mopar Performance and Holley.

I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.

Price is $500 shipped in the lower 48 states.

I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 12 new Mopar Performance forged flat top pistons and pins. There are 3 different part numbers. There is not one complete set. Here is what I have.

P4876976 – Quantity of 6. Specs are 4.060” bore & ~ 1.67” compression height. These pistons are for a 0.060” overbore 360 with the stock stroke crankshaft or a 0.020” overbore 340 using a 3.58 stroke crankshaft.
Price for the 6 new forged pistons is $260 shipped.

P4876978 – Quantity of 4. Specs are 4.030” bore and ~ 1.67” compression height, These pistons are for a 0.030” overbore 360 with the stock stroke crankshaft
Price for the 4 new forged pistons is $160 shipped.

P5007413 – Quantity of 2. Specs are 4.030” bore and ~ 1.47” compression height, These pistons are for a 0.030” overbore 360 with a 4.00” stroke crankshaft.
Price for the 2 new forged pistons is $80 shipped.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

New MSD Digital 6AL ignition module part #6425 $300

Used chrome ignition box $60

Used Jegs coil $35


Prices include shipping to the lower 48 states. I will ship internationally for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

SELLING OUT 340-360
mopar parts
COATED 1 7/8S JR 340-360,MULTI PIECE HEADERS B&E STOCK/SUPERSTOCK ARE NEW NEW$500
NOS RICHMOND 4.10 R&P FOR 8 3/4 742 $200
29440 MALLORY COIL, NOS$100
MSD5C USED$50
NEW CARTER#M6270 340-360 MECH FUEL PUMP$100
REMAN 1 INCH CAST IRON BRAKE MASTER CYLINDER#3699264 74-78 D&P $50
1976 360 .030 STOCK SHORTBLOCK,CAST PISTONS,NEW RINGS&BEARINGS, SAT FOR 20 YEARS$500 WITH HD ENGINE STAND
360 MOROSO DEEP OIL PAN,PICKUP, OIL PUMP,WINDAGE TRAY, ALL NEW ,WAS INSTALLED ON ABOVE SHORTBLOCK,,REMOVED$250
MP 8 3/4 SUBBER EXC, BOLTED ON ,POLY SNUBBER&1 SPARE POLY SNUBBER, NEVER TOUCHED TO BODY,$75
MALLORY SPARK PLUG WIRE SEPARATORS,NEW IN PKG$50
NEW 340-360 CROWER CAMSHAFT AND LIFTERS &MP DOUBLE ROLLER CHAIN&GEAR SET,CAM IS #31981 304HC, 501/304 114 LOBE SEP, .334 LOBE LIFT,238 DURATION AT .050, LIFTER#66031X3-16, BRAND NEW$400
PICS AVAIL EMAIL OR TEXT
ALL ITEMS PLUS SHIPPING
FOR LOCALS HAVE LIKE NEW CRAFTSMAN 3 TON FLOOR JACK&4 JACK STANDS,CREEPER,GREASE GUN,Fox HD BATTERY CHARGER W/JUMP, SMALL AIR COMP,SNAP ON 1/2 ELECTRIC IMPACT,SNAP ON INDUCTIVE PICK UP MT-1221 TIMING LIGHT,2 TOP TOOL BOXES,FULL SK 1/4,3/8S,1/2 SOCKET KITS,SUPERCHROME WRENCHS,TORQUE WRENCHS,HF LIGHTED WORK BENCH,2k
cowgerwilliam035@gmail.com
apache junction az

Genuine "Made in USA" 3" rear wheel studs. These have the corect "knurl" dimension for Mopar axles. Brand new.

NOTE: these are REAR wheel studs ONLY. The fronts take a different size knurl


Studs for RWD cars are heavy-duty and extra long to allow use of wheel spacers. Set contains 10 studs. 1/2" Diameter, Drum Brakes (A-, B- and E-Body)

$40. U.S. plus the ride. Paypal F&F Ships from Canada

Brand new Moroso U-joint Girdle for 8-3/4

Fits: Chrysler 8.75 in.

Bolt to Bolt Length (in): 1.504 in.

Bearing Cap Outside Diameter (in): 1.063 in.

U-Joint Girdle Material: Aluminum

U-Joint Girdle Finish: Silver anodized

Quantity: Sold as a set.

Notes: Use with 1-1/16 in. dia. cap and 1.505 in. bolt centers

Made from 7075-T6 aluminum, Moroso U-Joint girdles have a unique design which provides more bearing surface for the universal joint bearing cap. The result is greater strength compared to conventional girdles. The girdles have an anodized finish and come complete with fasteners.

$40. U.S. plus the ride. Paypal F&F Ships from Canada

Msd 8 Plus ignition box. Pn 7805.
Great condition. Works like new.
$1899 from Msd now.
$650 shipped to you.
Pm me here. Located in NW Indiana.
SOLD!