For sale is an orginal shroud for 68-69 V-8 cars. No cracks or breaks. Will not warp like aftermarket ones. $250.00 plus shipping from Florida blewbyu2bad@aol.com

I have a 4 speed console out of a 1971 Mexican superbee I remember the car it came out of was in muscogee Oklahoma several years ago not sure why it got parted out. But this console is in driver's quality it has a small hole about the size of a nickel on the side not sure why. The top plate has some pitting not horrible and unusable I will take any pictures you need. I have been cleaning this up the only thing left to clean is the ash tray area. I don't have the side cover for it. 850.00 plus shipping from okmulgee Oklahoma or can be picked up if local. Thanks Andrew

I have a couple of these
67 to 70 Duster Dart Valiant Barracuda NOS Disc Brake Master Cylinder 2225541 Mopar 68 69 A Body
These are for power or manual Disc Brake
200.00 shipped

Restored AVS carburetor for 1970 340 auto cars. Date Code L9. Linkages, screws, solenoid housing and bracket disassembled and zinc plated. Solenoid tested and works.

$750.00 + shipping for zip code 18929

cudaize@comcast.net

1975 NOS High Performance EGR Valve for HP 360/400/440 engines, part#3874027, no box, $105 shipped. lafrancebiglou@aol.com

Sold as cores, all are free moving, dirty originals. Carter 4934 s with ID Tag, $400, 4749 Holley, $100, Carter 4615 sa with ID Tag, $400, TQ 6318s, $400. plus the ride. lafrancebiglou@aol.com

Dart/Duster/Demon/Valient/Scamp, Power steering, automatic. Good Turn signal switch, key, hazard switch, great harnesses and has harness cover also and pretty nice chrome handles. $200 plus the ride. lafrancebiglou@aol.com

Pair of 1973 A body upper control arms for disk brake's from a new Mexico car, went to tubular uppers arm's don't need, and some cleaning, $75 +shipping

3 speed Wiper Motor A Body 1974 3431905 dated 317/74 Power applied and it works with correct Arm Nice Barrel color good harness and plug $275 moparphilll@aol.com

have a early a body 4 speed (no vin pad)moves freely pretty clean inside can text pics if serious must be pu in sw michigan asking $400.00 obo pm if interested

SOLD SOLD SOLD SOLD SOLD

These are a pair of Rebuilt 65-72 Kelsey Hayes disc brake calipers that are used on the A body cars, during those years, as optional equipment.
And can also be used on earlier year cars, if doing a change over to front disc brakes.

This is the current pair of calipers that i have for sale, and the last pair of calipers that i have left for sale.
Good rebuild able cores are just to hard to come by anymore, for me to find and then rebuild.

I just completed the rebuilding of them, and now i am putting them up for sale.
These officially started life as 69 calipers, and you are getting them with all the new hard lines on the calipers, and naturally with new rebuilding seal kits, that were required in rebuilding them, and new pistons that were necessary for replacement, new pads, and all of the new metal hard lines on the body of the calipers. And all 4 of the pad hold down clips.

These calipers are pretty much out of stock, at the parts store level, these days, in this modern day and age.

Replacement parts costs have gotten very expensive since the last pair of these KH calipers that i rebuilt, last year, for resale purposes.
The hard brake lines are now costing sixty dollars from the selling company, and the kits, pistons, pad clips, have also substantially gone up in price.
These calipers are quite expensive to rebuild, in this modern day and age, sad to say.

I have done all the hard dirty work for you in rebuilding them.
I am now a retired, former full time, auto mechanic, that has all the professional, proper tools, in getting the old, stuck, pistons out of their bores.
Shop labor rates are $150.00 + dollars an hour where I'm at, and if i charged one half that, it would be a low labor rate.

They have been hand scrubbed clean in the solvent tank, then soaked out in a pail of Evaporust, to bring them back to bare metal condition, then painted up cast iron grey, with a spray can of VHT high heat paint.
And a can of VHT paint is now costing 13 bucks, at the parts stores, in my area.
I need to see $425.00 for these calipers with all the parts that go into them during the rebuild, my labor time in doing them, and the price that i had to pay for them in the beginning, and the kits, pads, pistons, hard lines, paint.

Selling this pair at $425.00, with all the new parts that are included with this sale.

Payment will be by Pay Pal, or a good old fashioned USPS money order. And the delivery to you will be by the USPS.
I figure i will securely package them up in a USPS large flat rate box, to survive the journey from point A to point B, within the USPS system.

I have previously been sending these calipers out thru the USPS at $25.00 in one of their large flat rate box's.
So that will be the shipping cost.

If your a serious buyer, and not a shopper, or tire kicker, send me a message thru this forum and i will give you my e mail address, and or telephone number, if you need to talk with me, with the time that you can contact me.

Jim V.
hemi71x

Rear benchseat from a 1971 Duster

Still has the original factory vinyl seatcovers. One small rip, cleaned up this could be used in a driver. The frames are clean

Rear Seat - Will interchange / fit ALL 1968 -76 A-body models.

$100.00 Local Pick-up preferred
[or open to shipping for additional shipping charges]

Complete dash from a 1970 Duster

Will interchange into 1970-76 A-body Duster, Valiant, Dart & Demon

Includes:
> Dash gauges and bezel - standard style
> Dashpad
> dasframe
> Wiring harness
> Heator control w/ cables
> all switches



$125.00 Local Pick-up ONLY

Doors for Duster and Dart 2-door hardtop

Total of 3 Doors ALL Passenger Side
The doors are complete with Glass, Mechanism and Tracks


Will interchange 1970-76 A-bodies but there are minor differences. For example location / style of the interior door handle release

Description:
> Light Green - from 1973 Dart [still has interior doorpanel]. Nice straight clean door. Some surface rust on lower lip- NO holes
> Blue Door- from 1973 Dart [still has Deluxe interior doorpanel]. Some minor dents. Rust spots on lower edge and surface rust on lower lip- NO rustholes
> Dark Green - Interior release handle location for 1970-72 models. this door has the most rust

$50.00 EACH or ALL 3 $125.00 Local Pick-up

Mr. Norms - Dream Motors Super Charger vintage sticker - $40 - Will sell unframed for $25

Dodge Scat Pack banner - $25 ***SOLD***

NEW - Pack of (3) different Master cylinder gaskets ; 2) foam 1) gasket material - $6

NEW- Power steering return hose/clamps - $10

NEW - A BODY Fresh air vent to cowl seal (DMT) 63-66 fresh air vent to cowl, 67-76 NON A/C heater box to cowl, 67-72 AC heater box to cowl $8

NEW - (1) Rallye dash lens - PC Classics - $60

NEW - Horn buzzer relay (aftermarket) - $15

NEW - Header bolts hex head (9) - $10

NEW - 69-74 brake distribution block part #BLK250 - $60

NEW - (rebuilt) by Brake/Equipment Warehouse in MN - Weatherhead brake distribution valve - $200

NEW - 72-76 A body Rear axle brake line brass T (no bolt) - $15

NEW - 1970-71 340-440 Carter AVS Idle solenoid bracket - $30

NEW - A/B hood scoop mounting nuts x 11 - $15 ***SOLD***

NEW - LARGE chrome master cyliner cover with bail wire - says "WARNING - clean filler cap before removing, use only DOT3 fluid from a sealed container" - $25

USED - misc. seat belt mounting bolts x 12 - $20

USED - freshly refurbished A body blower motor mounting bracket to firewall with new gasket - $30


****PM IF YOU NEED TO SEE CLOSE UP OF A PARTICULAR PART - THANKS****


Prices don't include the ride -

Located in NW/Indiana


PM here on the board!

*** ALL SOLD***



Slightly used - Power Master #3257 starter - used only to get the car running after engine rebuild then found date coded starter - NEW $248, will sell for $100

NEW - Tuff Stuff alternator 130 AMP - I had painted the pulley to match OEM, then found correct date coded alt. - with receipt - paid $221 - will sell for $150

NEW REBUILT - Saginaw PS pump with bracket - had it rebuilt, mounted (never ran) then found I needed a Federal pump. Rebuilt by PS.com - $250 have receipt

Have more photos if needed - can only post 4 here

Prices do not include the ride -
located in NW Indiana

PM here on the board

I have a nice set of 1970 A body bucket seats up for sale. These are above average seats today. Nice solid frames, nice solid tracks, only has one broken stud on drivers side seat.
They have all four of the hinge covers, but the passenger seat inside hinge cover does appear to have a small crack. I have this pictured and I am sure could be repaired while seats are apart being restored.
These seat are for 1970, but are the same frames for early 1971 cars.
I am asking REDUCED to $800.00 OBRO for the pair. They are located in Cookeville, TN. I can deliver to Carlisle or Mopar Nats with a deposit.
I am selling these as cores to restore If you’re interested please send me a PM, as i have additional pictures I can email over.
Thanks, Matt

1972 340 4 speed carburetor
This carb is in good condition and moves freely.

$400 obo

Thanks

1970 340 4 speed carburetor

Good condition, rebuild or restore. Secondary throttle shaft is tight.

$400 obo

Thanks