904 Tranny Rebuild - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 904 Tranny Rebuild

Print Thread

904 Tranny Rebuild #297544 04/23/09 03:46 PM 04/23/09 03:46 PM
A Anonymous OP Unregistered
Anonymous OP Unregistered A	I've never rebuilt a tranny before, but I have convinced myself to go for it. Should I replace the servo's while I am at it? Any other suggestions? Shift or reprogaming kits? It's a '71 Cuda with a mildly built 360 engine.

Re: 904 Tranny Rebuild #297545 04/23/09 03:53 PM 04/23/09 03:53 PM
Joined: Jan 2003 Posts: 9,826 las vegas 70AARcuda master
70AARcuda master Joined: Jan 2003 Posts: 9,826 las vegas	I am in the processing of rebuilding an 904 also..this is what i use for the rear servo... http://www.makcotransmissionparts.com/S12912.html it has wider lips to keep it from flipping in the bore...have used 2 or 3 of these already. Tony 70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)

Re: 904 Tranny Rebuild [Re: 70AARcuda] #297546 04/23/09 04:03 PM 04/23/09 04:03 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	trans-go TF-2 for the shift kit live every 24 hour block of time like it's your last day on earth

Re: 904 Tranny Rebuild [Re: RapidRobert] #297547 04/23/09 04:04 PM 04/23/09 04:04 PM
Joined: Oct 2006 Posts: 7,367 Iowa burdar Owen's Dad
burdar Owen's Dad Joined: Oct 2006 Posts: 7,367 Iowa	Quote: trans-go TF-2 for the shift kit X2

Re: 904 Tranny Rebuild [Re: 70AARcuda] #297548 04/23/09 05:47 PM 04/23/09 05:47 PM
Joined: Jan 2003 Posts: 1,488 New Mexico 7 74Scamp pro stock
74Scamp pro stock 7 Joined: Jan 2003 Posts: 1,488 New Mexico	Quote: I am in the processing of rebuilding an 904 also..this is what i use for the rear servo... http://www.makcotransmissionparts.com/S12912.html it has wider lips to keep it from flipping in the bore...have used 2 or 3 of these already. Ha! Just ordered one of those for my 999 rebuild! Thanks for the info and the link! Dave

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1