727 dipstick calibration - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 727 dipstick calibration

Print Thread

727 dipstick calibration #2886762 02/11/21 02:15 PM 02/11/21 02:15 PM
Joined: Dec 2009 Posts: 306 Mesa, AZ cagebob1 OP enthusiast
cagebob1 OP enthusiast Joined: Dec 2009 Posts: 306 Mesa, AZ	Does anyone know the correct distance the oil level should be above the pan rail? I'm questioning the marks I made when I installed a locking dipstick in a shortened tube. I saw the measurement posted here a while back, but have been unable to find it. Thank you foe your help.

Re: 727 dipstick calibration [Re: cagebob1] #2886771 02/11/21 02:42 PM 02/11/21 02:42 PM
Joined: Jan 2003 Posts: 25,951 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,951 Rio Linda, CA	The FULL mark on the dipstick is 1/4" above the case ledge where the tube is inserted. The INTERNET, the MISinformation superhighway

Re: 727 dipstick calibration [Re: John_Kunkel] #2886779 02/11/21 03:07 PM 02/11/21 03:07 PM
Joined: Dec 2009 Posts: 306 Mesa, AZ cagebob1 OP enthusiast
cagebob1 OP enthusiast Joined: Dec 2009 Posts: 306 Mesa, AZ	Thank you sir! Your knowledge is a valuable asset to this group!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1