.So I have the splash shields bolted in place up under the fenders, I have the rubber gasket that runs along the curve of the fender. I am still missing the rubber one's that run along the top of the splash shield they clip in place. Does anybody sell these or do I have to make my own. Well I'm on the subject there is another rubber seal along the front of the fender to keep material from getting behing the head light buckets too. What about that piece? Sorry I don't have pictures to post what I am trying to explain. Thanks,Jay

Have you tried any vendors?

No not yet. Thought I try here first . I picked up the ones that run along the curve of the fender and did one side and then when I went to do the passenger side yesterday I noticed that side actually had the gaskets still in place. The drivers side I did did not have the upper one and the one by the front of fender. Maybe they rotted and fell of over the last 40 years unlike the passenger side. Thanks,Jay

Where did you get the side ones? Try the same source for the rest of them. They're readily available.

Year One has all that stuff.

O.K. Thanks guys. I knew somebody would know if they were avaiable or not.Jay

You have two splash shields seals, one is the horizontal and one is verticle. The seal behind the headlight is the headlight seal. All of them are available and I do have them in stock if you still need them.

Thank you Dante I appreciate it. Jay