46RH and 46RE Cases
#2636622
03/24/19 08:25 PM
03/24/19 08:25 PM
|
Joined: Aug 2007
Posts: 1,513 AZ
Mike P
OP
pro stock
|
OP
pro stock
Joined: Aug 2007
Posts: 1,513
AZ
|
It's probably been asked before but I can't seem to find the answer.
Are 46RE and 46RH cases interchangeable?
1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold 1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold 1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
|
|
|
Re: 46RH and 46RE Cases
[Re: A727Tflite]
#2636820
03/25/19 09:10 AM
03/25/19 09:10 AM
|
Joined: Aug 2011
Posts: 2,866 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,866
Pattison Texas
|
RE cases have a round plug behind the manual shaft lever where the RH has an oblong plug.
You need a control module to run the RE where the RH can use a simple switch to control overdrive ( and lockup if so equipped ). CRT John Cope has a manual valve body for the RE & RH
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: 46RH and 46RE Cases
[Re: moparx]
#2636921
03/25/19 11:39 AM
03/25/19 11:39 AM
|
Joined: Dec 2009
Posts: 20,647 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,647
in a cattle trailer down by th...
|
Actually both plugs are round where they go through the case but I believe the RE plug is larger so there is a bigger hole there.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: 46RH and 46RE Cases
[Re: moparx]
#2636925
03/25/19 11:56 AM
03/25/19 11:56 AM
|
Joined: Aug 2011
Posts: 2,866 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,866
Pattison Texas
|
i'm sure a guy can get the oblong plug for the RH, but i don't remember where. i didn't see it on cope's site. any help fo this dum old guy ? TIA ! https://board.moparts.org/ubbthread...e-race-only-trans-brake.html#Post2578239he has street versions also, they fit 518,46,47,48 rh & re
Last edited by csk; 03/25/19 11:57 AM.
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: 46RH and 46RE Cases
[Re: CSK]
#2636986
03/25/19 02:15 PM
03/25/19 02:15 PM
|
Joined: Mar 2011
Posts: 3,088 Michigan
A727Tflite
master
|
master
Joined: Mar 2011
Posts: 3,088
Michigan
|
The “plug” is round on the RE versus the oval “plug” for the RH. The plug is the external connector or female which attaches to the solenoid connector
The body for the solenoid “connector or male end” in the case is round in both applications.
RE is about 1.980” where the RH is about .920”.
Last edited by Transman; 03/25/19 02:18 PM.
|
|
|
Re: 46RH and 46RE Cases
[Re: A727Tflite]
#2637424
03/26/19 04:47 PM
03/26/19 04:47 PM
|
Joined: Aug 2007
Posts: 1,513 AZ
Mike P
OP
pro stock
|
OP
pro stock
Joined: Aug 2007
Posts: 1,513
AZ
|
Thanks everybody. My question was actually whether the cases themselves interchange. I'm looking into having another 46RH built and my trans guy can come up with all the parts except a good 46RH case.
1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold 1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold 1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
|
|
|
|
|