Looking for fenderwell G2 Hemi headers if they even exist...

Contact Ken at Hensley Performance.

I am running the TTI headers and Al Bevic Hemi conversion kit on the Demon

Don't take this the wrong way, but aren't TTI headers for a street car, meant to clear all the stuff like torsion bars and hug the trans? My car is low, its not a street car, and needs a fender well style..I am in the race section right?

don't use a-body hooker headers they will set too low,i have used b-body hooker headers and they sat up higher,alsi I didn't have ant fenderwell and was using coil overs in front

You might post over at Classracer.com. There are probably SS/AH guys that have lots of extra headers looking for that last .001.

You might also try Militia Racing Products:
CHARLIE WESTCOTT
517 531 3430
10420 COUNTY FARM RD
PARMA MI 49269
MILITIAPRODUCTS@GMAIL.COM

If he does not have anything he may have some customers that might.

Of course even used these headers are probably not going to be cheap.

It may not be a good idea to use used ss/ah headers because those are usually custom fitted. gear boxes have been moved, decks have been cut over.300,heads have been cut ,most have raised exhaust ports, or lowered in chassis. If you don't have that serious of an effort you could get away with tti with out any real lose in hp.Also most of the headers only have one tube that goes out of the wheel well.

Didn't Mopar have Hurst make 426 hemi A bodies
I've used several different sets of Hooker A body hemi race headers and they fit fine and install easily in Cuda and Dusters with a front motor plate

Headman headers

I just ordered the TTi 2-1/4 X 4in collector for coil over suspension.

Are you going to exit out the fender and if so do you plan on running any sort of muffler?

So I am looking for Any Hemi fender well A body headers for future, and I need a set for a 440 A-body for sure...

Headmens's didn't fit, they hit my shock towers. I need fender wells to clear the oil pan and diaper. The pickup line is AN16 and sticks out over 2" from the pan plus the diaper.

I have a very old worn out set on the car now. I am told they are Hooker headers, but the part numbers on Summits site for Hooker fender wells do not look like mine....

I don't think Hooker ever made any A body 426 hemi fenderwell headers
I've never heard nor seen any of them, always full chassis headers only for both race or street