production date for the 1968 dodge super bee
#2540577
08/23/18 07:32 PM
08/23/18 07:32 PM
|
Joined: Mar 2007
Posts: 3,141 tennessee,usa
mattsmopars
OP
master
|
OP
master
Joined: Mar 2007
Posts: 3,141
tennessee,usa
|
Does anyone have any documentation of the first production dates of the 1968 super bee. I have always understood it to be a half year thing stared to compete with the roadrunner. I have some 68 dodge production line up broches, and the super bee is not listed at that point with the rest of the dodge coronet line up. The earliest I have seen before now was January of 1968. I have seen a thread on Facebook, where a guy shows to have a 68 bee for sale with a build date on the tag of 8-11-67 and the vin number of WM21H8E100740, and I have never seen any that low. I did see online that the super be was introduced at the 1968 Detroit auto show, but I don't know the date on that either. Just trying to educate myself more I guess, but all the information that I have collected or anything on the super bee registry shows nothing this early. I will attach pictures the owner of the car posted from the FB thread. Thank you, Matt
|
|
|
Re: production date for the 1968 dodge super bee
[Re: mattsmopars]
#2540810
08/24/18 11:05 AM
08/24/18 11:05 AM
|
Joined: Oct 2003
Posts: 1,176 Woodbridge
Tommy The Chryco
super stock
|
super stock
Joined: Oct 2003
Posts: 1,176
Woodbridge
|
M21H8A289135 was the one I had. Blue with a white stripe, on the column black interior. no other options. 2 speed wiper, 289 gears.
Fight the Good Fight- Elastomeric Bumpers and The Better "Shaker kits"
|
|
|
Re: production date for the 1968 dodge super bee
[Re: mattsmopars]
#2540926
08/24/18 04:07 PM
08/24/18 04:07 PM
|
Joined: Jan 2003
Posts: 20,826 A collage of whims
topside
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 20,826
A collage of whims
|
Mid-year introduction, but I don't recall the date I first saw one, which would of course be sometime after production started. I visited Dodge & Plymouth dealerships on a weekly basis back then.
Remember, SCHEDULED production date isn't necessarily the ACTUAL production date, which begs the question: Maybe some were scheduled before being approved/authorized and then actually built? More likely it's a stamping error.
It would seem prudent to have cars in the pipeline by the time a show car was displayed, to take advantage of demand, but everything I've ever heard or read (to take my memory out of the equation) says the Road Runner came 1st, its success surprised Chrysler, and then Dodge wanted in on the game.
|
|
|
Re: production date for the 1968 dodge super bee
[Re: mattsmopars]
#2541028
08/24/18 08:31 PM
08/24/18 08:31 PM
|
Joined: Jan 2003
Posts: 20,826 A collage of whims
topside
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 20,826
A collage of whims
|
I looked around on Google, Allpar, Wikipedia, Hamtramck-Historical, etc and all I could find was that the earliest SPD on the SuperBee Registry is Jan 15. Another clue (maybe) is that some sites say the 4-speeds all had Hurst shifters, which happened on Road Runners & etc sometime in Dec '67-Jan '68 according to guys here with original '68 cars...a few Feb '68 cars still had Inland shifters, so that changeover date apparently differed among the various assembly plants. Feb 1st dealership memo from Dodge Div clarifies 4-speed standard in SuperBee, doesn't mention shifter. I didn't find any earlier mention of the SuperBee, but somewhere there has to be a memo to the dealers about its introduction.
|
|
|
Re: production date for the 1968 dodge super bee
[Re: topside]
#2541166
08/25/18 09:29 AM
08/25/18 09:29 AM
|
Joined: Oct 2003
Posts: 1,176 Woodbridge
Tommy The Chryco
super stock
|
super stock
Joined: Oct 2003
Posts: 1,176
Woodbridge
|
I looked around on Google, Allpar, Wikipedia, Hamtramck-Historical, etc and all I could find was that the earliest SPD on the SuperBee Registry is Jan 15. Another clue (maybe) is that some sites say the 4-speeds all had Hurst shifters, which happened on Road Runners & etc sometime in Dec '67-Jan '68 according to guys here with original '68 cars...a few Feb '68 cars still had Inland shifters, so that changeover date apparently differed among the various assembly plants. Feb 1st dealership memo from Dodge Div clarifies 4-speed standard in SuperBee, doesn't mention shifter. I didn't find any earlier mention of the SuperBee, but somewhere there has to be a memo to the dealers about its introduction. I personally have never seen a 68 superbee with a 4sp. Not saying they don't exist, just saying I have never seen one.
Fight the Good Fight- Elastomeric Bumpers and The Better "Shaker kits"
|
|
|
Re: production date for the 1968 dodge super bee
[Re: mattsmopars]
#2542896
08/29/18 05:58 AM
08/29/18 05:58 AM
|
Joined: Aug 2018
Posts: 16 Grover Beach CA
JeffB7189
member
|
member
Joined: Aug 2018
Posts: 16
Grover Beach CA
|
Hi guys, I'm the owner of the car in question here. I purchased it from the previous owner who inquired on another thread about rather it was "the first Super Bee." I purchased the car a few years ago not knowing there had ever been any controversy regarding the numbers. When I decoded it, everything came up, and the fender tag matched the body numbers so I just assumed all was fine. I knew the original engine and trans had been replaced, but to my knowledge everything else was pretty normal for its age. Needless to say, the revelations of the past week have been disheartening as I have quite a bit of money tied up in the car, and I had no idea there was even the prospect of something being out of whack. I've emailed the person who runs the Super Bee registry and this was his reply.
"Jeff, When I found this bee for sale in June of 2015, I too questioned the numbers also being a LA build that early. I asked a well known person in the hobby about it, and he had stated that yes it could have been and he had seen others early. I had always thought till mid year. The unknown is the history of this bee. The last title should have shown the current owner and the name of the state of the owner before that.
It could have been a test pilot build for a Executive or photo shoot. In most cases that would have shown in the order number, but it does not."
My next step is to send all of the info to the Chrysler Historic Society to see if they have a microfilm copy of the broadcast sheet matching these numbers. If they don't, I'm afraid at that point I have a tough road ahead of me determining what the car's history is, and how it came to have the unusual sequence it shows.
Last edited by JeffB7189; 08/29/18 06:01 AM.
|
|
|
Re: production date for the 1968 dodge super bee
[Re: mattsmopars]
#2542898
08/29/18 06:30 AM
08/29/18 06:30 AM
|
Joined: Aug 2003
Posts: 2,468 Answering the call of the wild
ThermoQuad
top fuel
|
top fuel
Joined: Aug 2003
Posts: 2,468
Answering the call of the wild
|
Car Owner Jeff Do not let this site discourage your quest for information. There were no PRODUCTION super Bees produced before Jan 1968. What about Pre-production Prototypes and Long Lead Press Cars? What say yee all you experts - How do you know this is not one of those cars? You don't... LA produced cars are not well documented and we do not know its inner workings. Stuff happened on the lines back then [documented information] and special cars not always got a special designation. This car is an anomaly that the experts can't explain because no one is an expert and it's 2018 not 1968. The experts really try hard to discredit cars that don't fit their mold. This place only represents maybe 20% of the market. The fender tag does not look reproduced. Fender tags can be examined with modern technology to determine their authenticity...Yup i said it. There is technology that can scan & measure that FT down to a single micron. Do the mopar experts want me to define a micron? Hint:google. I was conversing with Rob Wolfe from Mopar Collectors Guide magazine recently and he recounted the odd optioned road runner with solid documentation that all the experts said Chrysler did not build but it got built. There are plenty of examples out there. I suggest you contact MCG and get some ink on the mystery car.
Last edited by Dilbert; 08/29/18 06:51 AM.
|
|
|
Re: production date for the 1968 dodge super bee
[Re: ThermoQuad]
#2542906
08/29/18 08:55 AM
08/29/18 08:55 AM
|
Joined: Aug 2018
Posts: 16 Grover Beach CA
JeffB7189
member
|
member
Joined: Aug 2018
Posts: 16
Grover Beach CA
|
Thanks for the vote of encouragement Dilbert. I'm still working on getting it all figured out, and I'll be sure to update the post with whatever I can gather about it in the meantime. I've read several places that the LA plant was a bit more disorganized than the others, and they were more likely to experience quality control issues. One theory is simply a typo in the VIN sequence number... Anyone? Also, for anyone viewing the photo of the VIN, it appears to have been painted by the previous owner. In the thread he posted in the other forum you can see it pre-painted.
Last edited by JeffB7189; 08/29/18 08:59 AM.
|
|
|
Re: production date for the 1968 dodge super bee
[Re: mattsmopars]
#2542942
08/29/18 10:56 AM
08/29/18 10:56 AM
|
Joined: Aug 2018
Posts: 16 Grover Beach CA
JeffB7189
member
|
member
Joined: Aug 2018
Posts: 16
Grover Beach CA
|
Without getting too "Forensic Files" on anyone here, I just looked at the picture the previous owner posted of the VIN before he repainted it. It looks to me if you zoom in that there are some scratch marks on the dash around the tag that suggest it may have been pried off at some point. FML SO, while it may be, I can't say I'm wholly optimistic about the prospect of this being the original VIN of the car. I know the original color matches what's on the trim tag because when I pulled the seats and rear speaker deck, the original UU1 blue was obvious. Anyone know if there's a way for some entity like the Chrysler Historical Society etc. to look up cars from the build date of 8/11 and see if there were any UU1 Bees or even Coronets built at the LA plant that match the options on my trim tag? UU1 is a pretty uncommon color....perhaps if I could get listings of VIN#'s in that color from that date, I could get a better idea of the car's history.
Last edited by JeffB7189; 08/29/18 11:23 AM.
|
|
|
|
|