990 pin - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 990 pin

Print Thread

990 pin #244995 03/06/09 03:02 PM 03/06/09 03:02 PM
Joined: Jan 2005 Posts: 1,772 Keymar, MD DusterKid OP top fuel
DusterKid OP top fuel Joined: Jan 2005 Posts: 1,772 Keymar, MD	What for engines do you and can you build using a stock length 440 rod with a 990 pin size? Can you use these rods to make a typical 440? or are they more used for stroker kits? I can get a set of scat rods cheap but they are 990 pin size and didn't know what they are really used for.

Re: 990 pin [Re: DusterKid] #244996 03/06/09 04:11 PM 03/06/09 04:11 PM
Joined: Feb 2005 Posts: 5,207 Menomonee Falls DemonDust master
DemonDust master Joined: Feb 2005 Posts: 5,207 Menomonee Falls	Do you have pistons yet? If you don't just order a set with that pin size SDG Motorsports Hellcat Demon and Redeye Supercharger CNC Porting https://www.sdgmotorsports.com/

Re: 990 pin [Re: DemonDust] #244997 03/07/09 04:23 AM 03/07/09 04:23 AM
Joined: Apr 2007 Posts: 1,165 Central Ohio, USA Bigbeep super stock
Bigbeep super stock Joined: Apr 2007 Posts: 1,165 Central Ohio, USA	It is just a lighter, more common pin diameter originally used in BB chevys. I am currently working on a .055 over 440, stock crank, h beam rod, JE pistons with .990 pins. I am sure some of the others can chime in, so here is a

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1