Valve Clearance and milling. - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Valve Clearance and milling.

Print Thread

Valve Clearance and milling. #239893 03/01/09 01:52 PM 03/01/09 01:52 PM
Joined: Feb 2004 Posts: 964 Nanaimo, B.C. GwaiiEagle OP Mannix
GwaiiEagle OP Mannix Joined: Feb 2004 Posts: 964 Nanaimo, B.C.	When does piston to valve clearance become an issue? My 383 has true flattops 2315's. Without knowing if the thing was ever decked is it a crap shoot milling the 84cc Eddy's?

Re: Valve Clearance and milling. [Re: GwaiiEagle] #239894 03/01/09 02:01 PM 03/01/09 02:01 PM
Joined: Nov 2004 Posts: 2,825 Sk. Canada RemCharger master
RemCharger master Joined: Nov 2004 Posts: 2,825 Sk. Canada	measure the piston deck clearance. Don't do the crapshoot. Then report back.

Re: Valve Clearance and milling. [Re: RemCharger] #239895 03/01/09 02:55 PM 03/01/09 02:55 PM
Joined: Feb 2004 Posts: 964 Nanaimo, B.C. GwaiiEagle OP Mannix
GwaiiEagle OP Mannix Joined: Feb 2004 Posts: 964 Nanaimo, B.C.	The heads are still on. Not gonna get that done this weekend.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1