Drive Shaft Question - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Drive Shaft Question

Print Thread

Drive Shaft Question #2322954 06/18/17 10:28 AM 06/18/17 10:28 AM
Joined: Feb 2007 Posts: 195 SE PA Paul G OP member
Paul G OP member Joined: Feb 2007 Posts: 195 SE PA	I see the many other post about this and have looked several parts books but still cannot find an answer. I have two Drive Shafts that I cannot find an application for: 1. Has a 7290 yoke and is 41.25" from bearing center to center 2. Has a 7260 yoke and is 49.375" from bearing center to center Any help would be very much appreciated. Thanks Paul

Re: Drive Shaft Question [Re: Paul G] #2323001 06/18/17 12:10 PM 06/18/17 12:10 PM
Joined: Oct 2006 Posts: 7,371 Iowa burdar Owen's Dad
burdar Owen's Dad Joined: Oct 2006 Posts: 7,371 Iowa	There should be a part number stamped into them...if they haven't been worn away. Maybe that would be a better way of identifying them.

Re: Drive Shaft Question [Re: Paul G] #2323149 06/18/17 04:53 PM 06/18/17 04:53 PM
Joined: Jan 2003 Posts: 13,605 md M mopars4ever I Live Here
mopars4ever I Live Here M Joined: Jan 2003 Posts: 13,605 md	I don`t see any 41 inch shafts in my 73 book. I did find a 49.40 inch shaft for a challenger 318 with 904 and a 7260 u joint part number 3578146

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1