Transfer case interchange question? - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop Transfer case interchange question?

Print Thread

Transfer case interchange question? #2239232 01/22/17 06:23 PM 01/22/17 06:23 PM
Joined: Jan 2003 Posts: 8,670 Buford, GA I_bleed_MOPAR OP master
I_bleed_MOPAR OP master Joined: Jan 2003 Posts: 8,670 Buford, GA	My cousin has a '99 Dakota 4x4 with 5.2 and 5 speed transmission. He now needs a transfer case. I have one from my old '00 Durango 5.9 auto. Will it fit the manual trans? Thanks. Tim '71 Charger 383/727 '17 Challenger SXT (Wifeys car )

Re: Transfer case interchange question? [Re: I_bleed_MOPAR] #2240094 01/23/17 10:55 PM 01/23/17 10:55 PM
Joined: Dec 2014 Posts: 5,830 ohio R ruderunner master
ruderunner master R Joined: Dec 2014 Posts: 5,830 ohio	Check the tag numbers and input spline count. But I think they swap if both are mechanical or both are pushbutton. Angry white pureblood male

Re: Transfer case interchange question? [Re: ruderunner] #2240632 01/24/17 08:55 PM 01/24/17 08:55 PM
Joined: Jan 2003 Posts: 8,670 Buford, GA I_bleed_MOPAR OP master
I_bleed_MOPAR OP master Joined: Jan 2003 Posts: 8,670 Buford, GA	Both are part-time, mechanical shift. I would have to pull mine out of the vehicle to check the spline count. Stopped by a local junkyard and while the lady on the desk was very easy on the eyes and helpful, I never could get her to understand my question. They had several on hand for $250 so I may just pass that info on to my cousin. Thanks. Tim '71 Charger 383/727 '17 Challenger SXT (Wifeys car )

Re: Transfer case interchange question? [Re: I_bleed_MOPAR] #2242695 01/28/17 10:57 AM 01/28/17 10:57 AM
Joined: Dec 2014 Posts: 5,830 ohio R ruderunner master
ruderunner master R Joined: Dec 2014 Posts: 5,830 ohio	The auto will be 23 spline. Some manual were 23, others 29. Wouldn't hurt to try to read the I'd tags on the cases. Angry white pureblood male

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1