Just getting ready to start on my 1972 Rallye drivetrain transplant and realized the stock fuel line might be a bit restrictive for the new engine. 400hp small block in place of the stock 340 engine. probably need a 3/8 line and some fresh hoses while I'm there. Anybody had good results from any companies that makes new fuel lines? Would like to hear who you guys used and had good dealings with.

bump

Any reason you don't want to just make your own? You can get a 25' roll of 3/8" aluminum fuel line for around 20-30 bucks from your local auto parts store. Then bend and flare to what you want. It's a good way to go unless you really want the perfect bends/shape of stock line.

Check out both of these guys: http://www.inlinetube.com/ & http://finelinesinc.com/catalog/index.php

i just asked this question last week. moparts talked me into making my own. so thats what i'm doing. saved $80 too. i have a post going about how to get the coil straight before i start bending it to fit.

The reason I don't make one is because I don't kabe the flaring tools, bender, knowledge on how to do it correctly. On top of that, I'm kinda not sure if I wan't to mess with a brake system component since I am a safety freak. I just figured somebody on here might havve used a compitent company that wpild ship a quality product and get me started in the right direction.