Oiling holes line up...where??? on 273 trying to prime - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Oiling holes line up...where??? on 273 trying to prime

Print Thread

Page 2 of 2

1

2

Re: Oiling holes line up...where??? on 273 trying to prime [Re: RapidRobert] #210203 02/04/09 08:17 AM 02/04/09 08:17 AM
Joined: Jan 2005 Posts: 460 Kentucky G Greencospeedshop OP mopar
Greencospeedshop OP mopar G Joined: Jan 2005 Posts: 460 Kentucky	Quote: you might take off the drivers rocker arm assy & see if you can blow some air in the passage & see if it's coming out at the #2 cam journal, (if so) take the passenger rocker arm assy off & see if its clear to the #4 cam journal. If both are open you wont have to R&R the heads. (If not) your only out a pair of head gaskets An excellent suggestion and This I will do,only thing is , might it be hard to see/do with the cam in place ? Officer to me... "I had my pedal to the floor and you were still pulling away like a rocket!"

Re: Oiling holes line up...where??? on 273 trying to prime [Re: Greencospeedshop] #210204 02/04/09 11:28 AM 02/04/09 11:28 AM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	Quote: might it be hard to see/do with the cam in place ? Yes, cam would need to be out & I was going by the pic & I thought it was still out. EDIT I reread the posts & that was a pic that Snoopy posted. Last edited by RapidRobert; 02/04/09 11:41 AM. live every 24 hour block of time like it's your last day on earth

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1