I got my stripe kit from Poenix Car Graphics. There is a notch needed in the door stripe as it goes around/beneath the outside mirror. The kit I got isn't notched. Anybody else have a better kit recommendation with the notch?

Thanks!

Anyway to just notch it yourself? Vinyl is easy to work with and all you would need is the dimensions to trim it to the correct size.

I would at least contact the vendor and let them know that they should fix their problem.

Is it on the passenger side ? The passenger door on anybody's stripes are not cut . Most cars came with a single mirror .

I took some pin striping tape and outlined the mirror and then removed the mirror. Then I applied the stripe and then cut it out with a new razor blade. I made sure that I matched the air gap from the driver side onto the passenger side.

Here is a picture of a factory stripe on the driver side.