Max Lift W/Stock Rockers and Pushrods - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Max Lift W/Stock Rockers and Pushrods

Print Thread

Max Lift W/Stock Rockers and Pushrods #1882992 08/01/15 06:16 PM 08/01/15 06:16 PM
Joined: Mar 2009 Posts: 187 Ia 4 4spdana OP member
4spdana OP member 4 Joined: Mar 2009 Posts: 187 Ia	408 , LA Steel Head 2.02/1.60, bowl port&port match,9to1,performer int.,1-5/8 headers,4,10 w/37"tires,4x4, 5300# and stock converter........... what cam and carb? needs to run on 87 octane keeping stock rockers and push rods want it to sound like a bid cam , but not act like it..... want good low and mid range , good to 5800 or 6000

Re: Max Lift W/Stock Rockers and Pushrods [Re: 4spdana] #1883116 08/01/15 10:09 PM 08/01/15 10:09 PM
Joined: Jul 2004 Posts: 3,805 Arlington, Texas B bobby66 master
bobby66 master B Joined: Jul 2004 Posts: 3,805 Arlington, Texas	Maybe look at the Hughes Engines "Whiplash" cams. Or Lunati's version of the same concept.

Re: Max Lift W/Stock Rockers and Pushrods [Re: bobby66] #1883177 08/01/15 11:40 PM 08/01/15 11:40 PM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	About .5" with springs matched to a moderate cam is the rule of thumb for stock rockers.

Re: Max Lift W/Stock Rockers and Pushrods [Re: 4spdana] #1883225 08/02/15 12:45 AM 08/02/15 12:45 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	I agree that anything over .500 lift is pushing your lock on stock pieces. Ron

Re: Max Lift W/Stock Rockers and Pushrods [Re: 4spdana] #1883400 08/02/15 10:38 AM 08/02/15 10:38 AM
Joined: Jan 2003 Posts: 21,065 Niles , Ohio T therocks oh wait.but hey.lets see.oh yeah.
therocks oh wait.but hey.lets see.oh yeah. T Joined: Jan 2003 Posts: 21,065 Niles , Ohio	I agree with Ron I ran a .500 lift cam in a 440 for a while.It was a daily driver at the time.With the heavy springs and lift it started to hog out the rockers.Went to adjustables when I went to a .525 cam.Rocky Chrysler Firepower

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1