Brake Prop Valve Detail Hardware Needed-Any Sources? - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Brake Prop Valve Detail Hardware Needed-Any Sources?

Print Thread

Brake Prop Valve Detail Hardware Needed-Any Sources? #1864087 07/05/15 02:01 AM 07/05/15 02:01 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	This is a pic of an original 70-71 A-body Brake Prop Valve bolt head (It holds the proportioning valve to the inner fender).Nearly the same exact bolt style and length is also used for retaining brake line clamps to the undercarriage in various applications but the head stamping varies slightly as well as the head markings (likely same bolt, two vendors). Anyone know a source for these? Most are clear zinc plated but some I've seen were dark phosphate. Bolt is resting in a spare part for the 1st pic, ignore the background.

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1864089 07/05/15 02:02 AM 07/05/15 02:02 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	Prop Valve Bolt

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1864091 07/05/15 02:03 AM 07/05/15 02:03 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	Here is what the fuel line head marking looks like, both have serration teeth on the flat side of the molded in washer.

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1864381 07/05/15 04:54 PM 07/05/15 04:54 PM
Joined: Jan 2003 Posts: 25,791 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,791 Rio Linda, CA	Like this? http://www.allensfasteners.com/detail.asp?Product_ID=A10084 The INTERNET, the MISinformation superhighway

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1864486 07/05/15 07:44 PM 07/05/15 07:44 PM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	Yes John, that's the style. You wouldn't happen to know what head markings those have would you?

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1865184 07/06/15 04:24 PM 07/06/15 04:24 PM
Joined: Jan 2003 Posts: 25,791 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,791 Rio Linda, CA	Sorry, no. I use a lot of Auveco fasteners and the head marking don't seem to be real consistent. The only fastener catalog I have that shows actual head markings is the AMK and they don't show a bolt like that. The INTERNET, the MISinformation superhighway

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1865243 07/06/15 05:19 PM 07/06/15 05:19 PM
Joined: Apr 2012 Posts: 18,880 - R RSNOMO Moparts Torchbearer
RSNOMO Moparts Torchbearer R Joined: Apr 2012 Posts: 18,880 -	I've made a lot of runs over here, over the years... Maybe... Motor City Fastener Inc. 1600 E 10 Mile Rd, Hazel Park, MI 48030 (248) 399-2830

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: RSNOMO] #1865275 07/06/15 05:42 PM 07/06/15 05:42 PM
Joined: Jan 2003 Posts: 2,295 Land of 10,000 Lakes 4 44D6PAKCUDA top fuel
44D6PAKCUDA top fuel 4 Joined: Jan 2003 Posts: 2,295 Land of 10,000 Lakes	How many you need Scott.................

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: 44D6PAKCUDA] #1865373 07/06/15 08:13 PM 07/06/15 08:13 PM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	I only need one. I could also use a prop valve (71 Abode manual KH disc brakes dated Aug/Sept 70) but that's probably a tougher score

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1865394 07/06/15 08:55 PM 07/06/15 08:55 PM
Joined: Jan 2003 Posts: 2,295 Land of 10,000 Lakes 4 44D6PAKCUDA top fuel
44D6PAKCUDA top fuel 4 Joined: Jan 2003 Posts: 2,295 Land of 10,000 Lakes	Going to Carlisle??

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1865507 07/06/15 11:13 PM 07/06/15 11:13 PM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	I wish....too much work to do here.

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1865736 07/07/15 10:26 AM 07/07/15 10:26 AM
Joined: Sep 2010 Posts: 1,551 Sweden 71redcuda pro stock
71redcuda pro stock Joined: Sep 2010 Posts: 1,551 Sweden	Originally Posted By ScottSmith_Harms I wish....too much work to do here. I have some of these original bolts for fuel/brake lines. think its the same style of bolt to the valves mention above.. atleast on the cars i have seen. I have the bolts with maby 3-4 different headmarkings. Thanks Nicklas

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1865749 07/07/15 10:40 AM 07/07/15 10:40 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	Thanks guys, I found one on a pats car so I'm good for what I need. On the other hand, it would be good to know if there is a source for these for others, I'm guessing "not", but if anyone finds one let me know. Thanks!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1