I would like to see if anyone can post a picture of the above combo that shows the area where the header flanges, tranny pan, and tranny cross member are in relationship to each other.
The TTI web page does not show a close enough side view to let me see this area.

Thanks

Bump for the week.
I am just looking for some pictures that might show the area around the tranny pan with the headers installed.

Thanks

If no one else post, I'll take a couple later today.

Gary,
I would greatly appreciate the pictures. Plus they would be on the board for others to reference in the future.
I should have noted that any SB would do for the pictures. I mainly want to see where the flange reducers end up being located around the tranny pan and crossover.


Thank you,

As promised: This is my 74 challenger driver with a 340/727 & 10+ year old TTIs. Sorry I couldn't really get any good shots. Let me know if you want a particular area, it's on the lift now.

Gary,
The pictures are exactly what I was after. Thank you very much for your effort.

wow , driver , you aint kidding!
those 10 yr old TTI's looked worse than my 20 year old painted Hooker headers when we hacksawed them off my car!

maybe this can help you. 70 challenger 340/auto

Jim,
Thank you for posting the picture. That does help as I am waiting for my TTi's to be delivered and I am trying to figure out how I am going to connect the header reducers to my existing exhaust without taking it to the muffler shop during the Winter. The pictures are giving me a better idea where to cut my existing head pipes to get the headers to drop in. Another concern was, could I get my 727 tranny pan off after the header install, and it appears that there is some clearance.
Thank you for your reply.