Can someone post a pic of what the 66 Plymouth Dog Dishes looked like.

This dogdish Hubcap came with a bunch of stuff I got with my 65 Fury Wagon. I might be way off,as I dont know what this cap fits either,but figure I might be close since it came with my 65.

Hope this helps at least a little.

Here's an original

So what would the dogdish I posted be off of?

Early 60s Forward Look.

Quote:

---

His don't look like any of these posted.

---

Thats what I'm thinking, I've been searching the e bag and there are so many different ones....I never knew Mopar made so many different dog dishes.

I don't see a '66 Hemi Belvedere in Leno's collection, only a '66 Hemi Coronet 500. Dodge caps will be different than Plymouth.

There were two size caps used on Plymouths in '66, A bodies had 9" caps, everything else had 10".

The B body caps are shown in Scotts pic.
Here is an A body cap.


The bad thing about the 10" caps is they only fit '67 and earlier 4.5" bolt pattern wheels and if you want a 15" wheel, they are almost impossible to find.

The '66 A body cap will fit all 4" bolt pattern and all '68 and up 4.5" bolt pattern wheels, even the 15x7" and 15x8".

I don't see any caps in the Nicks Garage link, only full wheel covers.

Correct, Leno has a GG1 Dark Green Hemi 1966 Dodge Coronet and an EV2 Hemi Orange 1970 Hemi Challenger. Those are the only Hemi cars he own.

The photo Scott posted is correct.

I agree with Scott too.

I only have one and it's for sale. needs a little cleaning;

Here's what the 1967 only Plymouth Nut covers look like.

Just one up close. In the pics above there are 3 NOS examples, the lower left (this one) is a good used one, all have original paint. These are only correct on 1967 Plymouth BelvedereI, BelvedereII, and Belvedere GTX models.