New cylinder heads by Don Garlits - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer New cylinder heads by Don Garlits

Print Thread

New cylinder heads by Don Garlits #1693823 11/03/14 01:24 PM 11/03/14 01:24 PM
Joined: Jul 2005 Posts: 636 Graz, Austria DGS OP mopar
DGS OP mopar Joined: Jul 2005 Posts: 636 Graz, Austria	Came across these new heads from Don Garlits: photo Quote: "CPPA Street Fighter heads USA made from A356 T6 aluminum; combustion chamber volume 84cc; exhaust runner volume 70cc; Intake runner volume 210cc; Angled spark plug location; Intake valve diameter 2.14; Exhaust valve diameter 1.81; 15 Degree valve angle; valve stem diameter 11/32; Valve guide material Bronze; Stainless valves; Direct bolt on; oil through head like stock... $1195 complete for hydraulic apps and $1395 for solid apps... porting and polishing options available... ph 888.548.2282 NOW!!!" https://www.facebook.com/ChryslerPower?hc_location=timeline - you have to scroll down a bit more on the topic here: http://www.forbbodiesonly.com/moparforum...-aluminum-heads Last edited by not_a_charger; 11/03/14 01:30 PM.

Re: New cylinder heads by Don Garlits [Re: DGS] #1693824 11/03/14 01:32 PM 11/03/14 01:32 PM
Joined: Jan 2003 Posts: 16,376 D dogdays I Live Here
dogdays I Live Here D Joined: Jan 2003 Posts: 16,376	Another variant of the Edelbrock? Too bad it couldn't have a modern chamber. No mention of Garlits in the Facebook blurb. But why should we care, it's not a Hemi part... R.

Re: New cylinder heads by Don Garlits [Re: dogdays] #1693825 11/03/14 01:45 PM 11/03/14 01:45 PM
Joined: Jul 2005 Posts: 636 Graz, Austria DGS OP mopar
DGS OP mopar Joined: Jul 2005 Posts: 636 Graz, Austria	Quote: Another variant of the Edelbrock? Too bad it couldn't have a modern chamber. Yeah, I don't get it either..

Re: New cylinder heads by Don Garlits [Re: dogdays] #1693826 11/03/14 01:49 PM 11/03/14 01:49 PM
Joined: Mar 2005 Posts: 2,644 North Carolina sasquatch master
sasquatch master Joined: Mar 2005 Posts: 2,644 North Carolina	Ah those look like Sidewinders to me...AH not made in America but they are selling like hotcakes....Give it another 3 months and you should be able to get them almost anywhere...Todd www.mopartsracing.com

Re: New cylinder heads by Don Garlits [Re: sasquatch] #1693827 11/03/14 06:29 PM 11/03/14 06:29 PM
A Anonymous Unregistered
Anonymous Unregistered A	Looks like Sidewinders to me Dynoed a plain 440 last week-- hyd cam , crappy torker II intake, stamped rockers--Nothing fancy --Sidewinders--made over 530HP --nice street engine EASY AS PIE--Bolt them on and Roll Me Likey Sidewinders-- Got them from Marsh Performance--NICE valves, all Comp hardware--Bolt on a Rock! Yahoo!!! No cheapo componants--came assembled ready to bolt on.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1