Wiper arms stop straight up. - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Wiper arms stop straight up.

Print Thread

Wiper arms stop straight up. #1674455 09/20/14 12:10 PM 09/20/14 12:10 PM
Joined: Jul 2013 Posts: 17 lapeer, mi. R rtjerry OP member
rtjerry OP member R Joined: Jul 2013 Posts: 17 lapeer, mi.	Hi, 67 Coronet R/T 2 speed wiper motor stops in the up position when turned off. What could cause this? P.S Also the stock air cleaner base has a small opening for carb. I replaced carb with a Eddy 750 now need larger opening for new carb. Are there any bases that will fit the original top about 18"DIA. Thanks Jerry

Re: Wiper arms stop straight up. [Re: rtjerry] #1674456 09/20/14 01:28 PM 09/20/14 01:28 PM
Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun nomore65BelvJim I Live Here
nomore65BelvJim I Live Here Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun	Did you have it apart? Wiper cam installed 180* out is all I can think of. Thats if it always "parks" at the same full up position.

Re: Wiper arms stop straight up. [Re: rtjerry] #1674457 09/20/14 01:58 PM 09/20/14 01:58 PM
Joined: Jul 2013 Posts: 17 lapeer, mi. R rtjerry OP member
rtjerry OP member R Joined: Jul 2013 Posts: 17 lapeer, mi.	It has been apart not from me. What exactly is the wiper cam? Is it attached to the wiper motor? Last edited by rtjerry; 09/20/14 01:59 PM.

Re: Wiper arms stop straight up. [Re: rtjerry] #1674458 09/20/14 02:42 PM 09/20/14 02:42 PM
Joined: Aug 2005 Posts: 11,543 chicagoland,usa B buildanother I Live Here
buildanother I Live Here B Joined: Aug 2005 Posts: 11,543 chicagoland,usa	Agree if it follows the same "sweep" and parks at same spot, it may just be a matter of taking the nut off and flipping the arm 180 degrees and re-fastening.

Re: Wiper arms stop straight up. [Re: rtjerry] #1674459 09/20/14 03:50 PM 09/20/14 03:50 PM
Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun nomore65BelvJim I Live Here
nomore65BelvJim I Live Here Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun	Quote: It has been apart not from me. What exactly is the wiper cam? Is it attached to the wiper motor? Its the small lever arm attached to the wiper motor shaft. The wiper linkage attaches to and pivots on it. Should look something like... (photo blatantly stolen from the interwebs ) 8275833-68-69-70-charger-roadrunner-satellite-coronet-gtx-2-speed-wiper-motor-drive-link.jpg (82 downloads)

Re: Wiper arms stop straight up. [Re: nomore65BelvJim] #1674460 09/20/14 03:55 PM 09/20/14 03:55 PM
Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun nomore65BelvJim I Live Here
nomore65BelvJim I Live Here Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun	Might be this exact one... 8275837-67.png (78 downloads)

Re: Wiper arms stop straight up. [Re: nomore65BelvJim] #1674461 09/20/14 10:25 PM 09/20/14 10:25 PM
Joined: Jul 2013 Posts: 17 lapeer, mi. R rtjerry OP member
rtjerry OP member R Joined: Jul 2013 Posts: 17 lapeer, mi.	Thanks Guys, I will take it apart tomorrow to try. It makes sence.

Re: Wiper arms stop straight up. [Re: rtjerry] #1674462 09/20/14 11:20 PM 09/20/14 11:20 PM
Joined: Sep 2009 Posts: 1,377 Tennessee WyleECoyote pro stock
WyleECoyote pro stock Joined: Sep 2009 Posts: 1,377 Tennessee	Check the ground. Run a jumper ground to the motor.

Re: Wiper arms stop straight up. [Re: WyleECoyote] #1674463 09/21/14 02:05 PM 09/21/14 02:05 PM
Joined: Aug 2003 Posts: 1,145 ontario calif N ns1aar super stock
ns1aar super stock N Joined: Aug 2003 Posts: 1,145 ontario calif	Pictures!! The switch plate may be clocked wrong NS1AAR

Re: Wiper arms stop straight up. [Re: ns1aar] #1674464 09/22/14 09:58 AM 09/22/14 09:58 AM
Joined: Aug 2012 Posts: 1,574 Lakeland FL F floridian pro stock
floridian pro stock F Joined: Aug 2012 Posts: 1,574 Lakeland FL	Yes to the air cleaner base question.. Had the same problem with mine, found a base at a wrecking yard that worked with mine.. Seems as if alot of the bases are interchangeable.. 8277293-5554552-vertbaseball2.jpg (74 downloads)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1