E body vert questions

Print Thread

E body vert questions #159479 12/01/08 12:56 AM 12/01/08 12:56 AM
Joined: Jan 2003 Posts: 28,621 Shopping @ HoBo Fright 340SIX OP Doc Flappergas's Evil Twin
340SIX OP Doc Flappergas's Evil Twin Joined: Jan 2003 Posts: 28,621 Shopping @ HoBo Fright	I was wondering how your whell wells were welded in. Are the outer whell wells welded to the top of the caps with spot welds from the inside or outside? I am figureing the caps will need holes drilled in them and then mig welded closed And are they 2 halfs spotted together? I am assuming thats how they were done but with spot welds?

Re: E body vert questions [Re: 340SIX] #159480 12/01/08 01:04 AM 12/01/08 01:04 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Yes...The cap is spot welded to the wheelhouse & the inner & outer are spot welded together... Drill the cap & weld to the wheel house...Drill the outer & weld to the inner...I'll try to dig up some photos but I don't know how much they will show...BTW I use the old outer as a template to trim the new wheelhouse... 4850035-wheelhouse.jpg (49 downloads)

Hop To