without the weight of the drivetrain, it has 21" under it

I cut a hole

I fill the hole

Now I can get the correct angles for the drivetrain

Atlas says hi

By moving the drivetrain to the passenger side 1", I have room for everything

I tack welded the skid plate in place so I can drill the holes for the mounts

The Atlas poking out for a look

K-member/skid plate mount

motor mounts tack welded

Chassis only settled 1/2" from the weight

k-member offset to cleat the pinion and match the offset of the tranny pan. The t-case skid has the same offset.

Mounted the shifters to build the new tranny hump around them.

first piece is made

and the matching lid

Very nice work. Thanks for taking the time to show us the progress!

making patches

and lids

I still need to make a box around the shifters for the boots.

'07 waterpump and 145amp alternator mounted