Topic Options
#15306 - 04/27/05 09:08 PM CRASH SHEETS
Anonymous
Unregistered


SEE EDIT BELOW

I recently purchased some "crash sheets" for both 66-70 DODGE "B" body and 67-69 DART "A" body.

There is a frame diagram for both "B" and "A" body DODGE ONLY models.

These diagrams have critical frame measurements that can be used in conjunction with laser frame measuring equipment that body shops use for new car unibodies.

These measurement are critical for the frame to be put back in the proper place to insure the strength of a unibody.

If you are restoring or repairing one of these cars and it has had damage to the unibody this will allow your body shop to properly repair it so the car does not "fold up" if hit again with a weak spot in the unibody.

These are FREE to anyone that needs them.

Just send me your name and address and I will copy them and mail them to you.

Don't take a chance driving these high powered missles with a tweaked frame.

darryld1@cox.net

EDIT:
I just scanned this sheet and it came out well. I saved it at 850 pixels wide so the attachment will be reduced but when you capture it and blow it up it will be very readable



Attachments
1671828-CRASHSHEET.jpg (106 downloads)



Edited by 66hemi (04/27/05 09:59 PM)

Top
#15307 - 04/27/05 10:07 PM Re: CRASH SHEETS
topside Offline
I Live Here

Registered: 01/19/03
Posts: 11631
Loc: So Near, Yet So Far
Thanks for being so considerate, helpful & generous! These (and others when possible) should be in the Archives! How 'bout it, mods?

Top
#15308 - 04/28/05 12:19 AM Re: CRASH SHEETS [Re: topside]
Anonymous
Unregistered


Quote:

Thanks for being so considerate, helpful & generous! These (and others when possible) should be in the Archives! How 'bout it, mods?




Your welcome.

Top

Advertisement
Sponsored Link
Forum Stats
25,074 Registered Members
32 Forums
185,639 Topics
2,158,002 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Mustang project $999
by migsBIG
01/19/18 03:25 PM
Bottom end upgrade mandatory ?
by Torquemonster440
01/19/18 02:03 PM
3/8-24 fine-1 inch cam bolts source?
by 70satelliteguy
01/19/18 01:31 PM
Oldiron
by actionange
01/19/18 11:24 AM