Several years back when the EZ's first became available Dwayne built a 446 for a customer using the cnc 295's on an 11:1 shortblock with a flat tappet cam. The heads were purchased with a future stroker build in mind...from what i remember.

At any rate, the mild combo made very good power but the peaks were quite high. The number 675hp @ 7200 is what i recall. Torque peak was almost 6k. That combo ran high 9's in an A-body Cuda and was pump gas friendly. From my recolection of the conversation with Dwayne he felt that the car was understalled and undergeared for that particular engine combo and that was hurting ET.


Ron