sb rocker arm choices? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer sb rocker arm choices?

Print Thread

sb rocker arm choices? #1474955 07/27/13 05:24 PM 07/27/13 05:24 PM
Joined: Jan 2003 Posts: 538 PA M maxwedge1 OP mopar
maxwedge1 OP mopar M Joined: Jan 2003 Posts: 538 PA	installed "budget" aluminum roller tips several years ago. not a whole lot of miles on motor but just had my second and last adjuster backing out incident. any mid range price options? I havent really paid attention to aftermarket for quite awhile. dont need H sharp level stuff.

Re: sb rocker arm choices? [Re: maxwedge1] #1474956 07/27/13 06:13 PM 07/27/13 06:13 PM
Joined: Jan 2003 Posts: 1,761 Windsor, ON, Canada D Diplomat360 top fuel
Diplomat360 top fuel D Joined: Jan 2003 Posts: 1,761 Windsor, ON, Canada	What's the budget you have in mind? Sometimes the Comp Cams stuff turns up on-line...that's what I'm running on my 360 motor (older 1420-16 part). Hughes has some of their own stuff out there, mid-300s price wise I think. You could always look for an old set of the iron stuff...the original 273 is what I'm talking about (did they ever come on stock 340s???? no idea...).

Re: sb rocker arm choices? [Re: maxwedge1] #1474957 07/27/13 10:09 PM 07/27/13 10:09 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	If it's not pulling the threads out you likely just need to put a little more umpf on tightening the lock nut!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1